Jump to content
SAU Community

Recommended Posts

hey guys, we have a variety of r32 parts for sale, all off a r32gts4, everything from a 2 door... pics available upon request, otherwise we will slowly get them all up...

r32 passanger side door window $60

r32 " " window assembly with great motor $100

r32 rear seatbelts with buckles (all 3) $80 for the lot or $30 each

r32 gts4 seats, in great condition, no rips or stains $150 each $200 for both

r32 rear seat (base and back) in top condition $100

r32 gts4 roof trim, complete, good condition, no damage, no sunroof $80

r32 gts4 trims (behind the doors next to the rear seat) 1 is in great condition, other is missing the trim: $60 and $40 respectively

r32 gts4 center console, great condition, with all components working A1, no handbrake boot... $60

r32 gts4 center facia (the surrond that goes around the headunit and gearstick), in reasonable condition $40

r32 rear parcel shelf, in good condition, not cracked or broken... $60

r32 gts4 complete carpet, in really good condition $80

r32 gts4 glovebox, in good condition $50

r32 gts4 rear passanger handles (the ones mounted on the roof) $20

r32 gts4 center console part of the dash, great condition $70

r32 gts4 kick panels, have both sides, in good condition $30 each or $50 for both

r32 skyline sill trims, both side, great condition $80

r32 gts4 boot carpet, great condition $30

r32 gts4 boot trims (the main two big peices that go over the wheel arch and back) $70

r32 gts4 b-c-pillar trim, ones in reasonable condition the other not (drivers side) $50

r32 gts4 a-pillar trims, good condition $50 each or $75 for both

pioneer carrizora (or something like that) rear speakers (there are 4 speaker things on each) $70 for the both

r32 gts4 passanger door handle $10

r32 rb20 polished camshaft covers, only just recently done... $200 for the pair

r32 rb20 ported and polished head, with lapped in valves, and standard valvetrain $600

r33 rb25 polished camshaft covers, missing breathers $220

r32 rb20det camshafts, in great condition $80 pair

r33 rb25det VCT camshafts, in great condition $100 pair

r32 polished CAS mount $60

r32 rb20 polished intake manifold (standard type, with ported runners) $200

r33 rb25 polished intake manifold $250

r32 T3 flange top mount stainless steel manifold with wastegate pipe... good condition $180

r32 T3 standard turbo, with snout, and dump pipe, negligent shaft play... $150

r32 polished standard fuel rail (with reg etc) and injectors $60 and $80 repectively or $120 for both

r32 rb20 standard turbo manifold, great condition $50 suit rb25 too...

r32 turbo dump and front pipe in one... great condition $120

thats bout it for now, please PM us, or reply here and we will contact you...

located near lismore NSW, can deliver any item personally as far as Brisbane QLD, otherwise postage is okk with the smaller items...

cheers guys.

also everything has been removed due to turning the car into a track car and upgrading the engine/ everything...

Edited by sebastion

rb20 covers, plenum, under plenum and injectors, manifold, variety..., cas mount (rb), rb20 head, more to come...

post-53835-1253874163_thumb.jpg

post-53835-1253874239_thumb.jpg

post-53835-1253874319_thumb.jpg

post-53835-1253874391_thumb.jpg

post-53835-1253874618_thumb.jpg

post-53835-1253874737_thumb.jpg

hey just wondering if u have any suspension coming out of the gts4?

hey mate, yeah we will do sometime in the future, what exactly are you after? please PM us

any chance you have the stock r32 steering wheel?

yeah mate, sure do, its in good condition apart from the horn (the plastic inside is stuffed)

cheers

  • 2 weeks later...
Received item on Monday :) ...that was fast

Thanks heaps!

no worries mate, thanks, and hope you enjoy.

cheers

rb20 polished rail and injectors SOLD

  • 4 weeks later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...