Jump to content
SAU Community

Sportauto C6 Corvette Zr1 Supertest Results


Recommended Posts

c/o nagtroc

Results: ZR1 (GT-R)

Acceleration

0-100km/h: 4.0s (4.1s)

0-200km/h: 11.4s (13.1s)

Nordschleife

Peak lateral g: 1.6g (1.45g)

Straight Vmax: 288km/h (276km/h)

Lap Time: 7:38 (7:38)

Note: The GT-R is 10-12km/h faster than the ZR1 through difficult technical sections

just not on the straight.

so the original 7:38 time has been replicated by a car mag, surprise surprise.

- who was driving?

Makes you wonder how/why Porsche test drivers just couldnt do better than a 7:54 in a GTR

oh hang on, no need to wonder, it's actually pretty obvious really :D

c/o nagtroc

Results: ZR1 (GT-R)

Acceleration

0-100km/h: 4.0s (4.1s)

0-200km/h: 11.4s (13.1s)

Nordschleife

Peak lateral g: 1.6g (1.45g)

Straight Vmax: 288km/h (276km/h)

Lap Time: 7:38 (7:38)

Note: The GT-R is 10-12km/h faster than the ZR1 through difficult technical sections

just not on the straight.

0-100 km/h times for both cars are a bit on the tardy side, but as expected 0-200 km/h ZR-1 has a clear advantage. It shoould be no suprise that they recorded the same lap time since the best times both have acheived are almost identical (7.26's). This should prove to many of the GT-R knockers that the GT-R is what Nissan claim it to be. There is no shortage of Amercian car journo's and Corvette fans who claim the GT-R is a fake. This test proves it runs with their ZR-1. Also proves to Porsche that it's quicker than the 7.54min time they achieved.

7.38min is very quick but the factory drivers must be special to find the 12 seconds! Still it proves thru most performance parameters the GT-R and Zr-1 are about the same. At the end of the day GT-R has 4 seats, a decent boot and AWD to get you home safely in wet and damp conditions, it costs less, has a better interior and for me a better exterior. The Vette sounds glorious tho and is more low slung beast.

so the original 7:38 time has been replicated by a car mag, surprise surprise.

- who was driving?

Makes you wonder how/why Porsche test drivers just couldnt do better than a 7:54 in a GTR

oh hang on, no need to wonder, it's actually pretty obvious really :D

Both laps were driven by the mag editor, Horst von Saurma as is normal for most Supertest laps.

Sportauto's numbers for the 911 turbo make the whole Porsche/Nissan debarcle even more interesting.

Acceleration

0-100km/h: 3.8s

0-200km/h: 12.6s

Nordschleife

Straight Vmax: 282km/h

Lap Time : 7:54 (!!!!!)

and this particular 911T that Sportauto received was shod with Pilot Sport Cups and PCCBs

Over such a distance. Does anyone know roughly how much quicker the GT-R would be with carbon brakes on board?

My guess is that it would be the same. The 'ring' is not a track that is particularly hard on the brakes. steel rotors are just as effective as carbon ceramic in terms of stopping power - so long as they remain cool. One or two laps on the 'ring' is not enough to overheat steel rotors.

Edited by skyline_man
7.38min is very quick but the factory drivers must be special to find the 12 seconds!

On a circuit so long it would be near impossible to do a perfect lap ever, so 12seconds over 7+ minutes should be possible, considering Nissan's chief test driver has a lot of racing pedigree, including Formula 1.

There are too many factors involved that could impact both track conditions and also the car's performance. Thats why this is important to have the two cars run back to back on the same day. Its a more fair comparison. Use the other 'ring times as just an indication of each car's "best run so far".

Calling it "best lap so far" rather then "fastest" sounds like a good idea. Considering as you said track conditions, where 2 days there can "look" the same but the conditions are different.

More and more i want to plan a trip over to hire a car and go mental. mmm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...