Jump to content
SAU Community

Recommended Posts

could be a leak or restriction, check your cooler pipes are all connected nicely and done up tight, Your intake pipe might be closing in to (rubber pipe from turbo to afm)

depends on what setup you've got, post up a bit more info

could also be your boost controller? manual or electronic?

More info and I'm sure someone will be able to help sort it out

stupid me sorry lol its running the stock cooler and a manual boost controller. so your saying that the rubber hose could be sucking itself closed? well not closed but smaller. hmm thanks heaps for that il check that all the pipes are tight.

the rubber pipe should have a metal spring in it to stop it from being sucked closed.

boost should taper off at the end of your rev range, but probably not that much, what boost controller are you using?

running 13psi through the stock cooler probably isn't the wisest thing in the world to start with, and that may be part of the problem.

other possible causes:

boost controller issue

dump pipe issue (what size exhaust do you have)

boost leak

blocked or damaged cat

fuel or timing issue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...