Jump to content
SAU Community

Recommended Posts

My RB20 is pumping coolant out of itself and I've got no fking idea why. On a very short drive just now it near on filled the overflow bottle and there was bugger all coolant in the rad. The other day I took it for a decent thrash and the overflow bottle was bubbling away and pissing fluid out, the rad was pretty much dry, but the car didn't overheat or even rise in temp.

It seems like the cooling system is under way too much pressure. About the only thing I can think of that'd cause that would be blown head gasket, but there is no oil in the coolant and absolutely no smoke coming from the exhaust under load.

Is it possible to blow a hg in just the right spot to pressurise the cooling system but no have coolant enter the combustion process or would there be another reason for this?

I've tried to bleed out the air bubbles in the system using the little bolt on the front side of the inlet mani & also using the rad cap, both times it basically never stopped blowing bubbles out. Not sure if this is a clue or not to what could be happening.

Also, first time time I noticed this problem was after popping a cooler hose off when the turbo spiked to 1.5bar :D

Link to comment
https://www.sau.com.au/forums/topic/289177-rb20-cooling-system-problem/
Share on other sites

My RB20 is pumping coolant out of itself and I've got no fking idea why. On a very short drive just now it near on filled the overflow bottle and there was bugger all coolant in the rad. The other day I took it for a decent thrash and the overflow bottle was bubbling away and pissing fluid out, the rad was pretty much dry, but the car didn't overheat or even rise in temp.

It seems like the cooling system is under way too much pressure. About the only thing I can think of that'd cause that would be blown head gasket, but there is no oil in the coolant and absolutely no smoke coming from the exhaust under load.

Is it possible to blow a hg in just the right spot to pressurise the cooling system but no have coolant enter the combustion process or would there be another reason for this?

I've tried to bleed out the air bubbles in the system using the little bolt on the front side of the inlet mani & also using the rad cap, both times it basically never stopped blowing bubbles out. Not sure if this is a clue or not to what could be happening.

Also, first time time I noticed this problem was after popping a cooler hose off when the turbo spiked to 1.5bar :D

head gasket.. doesnt have to have oil in the coolant or smoke/steam in the exhaust.. its combustion pressurizing the coolant.. maybe when your boost spiked, it was enough to blow a hole in the head gasket.

is the car hard to start?? this can be a case of coolant in the combustion chamber and loss of compression due to it going into the coolant. pressure test the radiator.. if it drops but theres no external leaks, then its head gasket.

could also just be that your radiator cap has shat itself. however the chances that it just happened to stuff up at the same time as the cooler hose popped off would be pretty low.

i would more be leaning towards the head gasket though. i had an EA falcon as my first car and i did 2 headgaskets in it. both times it was around the time that it got a coolant leak (one time was a hole in a radiator hose, the other it blew a hole in the end tank of the radiator). both times i never had any water in the oil, or oil in the water, but it was hard to start and blew the smokey mist out the rear only when it was started after sitting for a while. in normal running it wouldn't

my money is on head gasket but i slight possibility if your turbo is water cooled is that it could be a blown gasket in the turbo between water and compressor. very slight possibility and not that many turbos are water cooled..

if it is head gasket dont drive it 2 much or you wont do 2 much good to the head or the mating face or the block either... its a day job to fix it by yourself.

if it is head gasket dont drive it 2 much or you wont do 2 much good to the head or the mating face or the block either... its a day job to fix it by yourself.

:thumbsup:

Have done about 30mins of sliding 2nd and 3rd through some quicker corners near my house after trying to fix some of the symptons described in the first post :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...