Jump to content
SAU Community

Recommended Posts

Hi all, I've been a member here for quite while but haven't really contributed much - mainly because I don't currently own a V35! Long story short I've loved these cars for a few years now and 18 months ago was a nasty pre-purchase inspection suprise away from buying a 2005 350GT premium pack sedan (full black leather etc.). Fortunately the inspection saved me some serious dough and oened my eyes to some real shiftiness.

18 months and a Honda Accord Euro later (brilliant car, just no guts), I decided to give into my urges and have put a deposit down on a 2003 premium pack coupe with a sunroof and what looks to be a DVD stacker in the boot. I have a pre-purhcase inspection scheduled for next week and I've got my fingers crossed that goes well. The dealer has said hey will fix any shortcomings identified by the inspection. All things going well I should have the car 2nd week of October (Has to be delivered from NSW to Melbourne)

Anyway a couple of questions - Chris Rogers is obviously the man with the know how on the electrical/multimedia side of things, so I was wondering Chris, when will you be in Melbourne next? I'm looking at a sat nav install (Garmin GVN53 to factory screen), cruise control and ipod adaptor install. I would normally do the ipod adaptor myself but these cars look particularly complex to remove the dash panels especially for the untrained.

Alternatively can anyone recommend anybody in Melbourne who has experience with these cars for the ipod adaptor and sat nav install?

Thanks in advance. Can't wait to finally own one of these :(

Link to comment
https://www.sau.com.au/forums/topic/289270-new-v35-owner-to-be/
Share on other sites

Just out of interest what was the shiftiness and potential dough eating on the '05?

Seller claimed the car was mint, had never been in an accident and had done 20,000kms. The inspection report showed a lot of dodgily repaired panel work and the general wear and tear on the vehicle was much more than you would expect for a vehicle which had supposedly done only 20,000kms, even if servicing had been neglected. The vehicle inspector told me he didn't believe the odometer reading was genuine. I've worked out that this particular seller seems to sell a lot of V35's under different names. You can pick his ads.

Edited by MSKYO

Hail "The King". AKA Chris Rogers, he'll probly know someone down here who could do it for you if he doesnt decide to visit. Hence he'll probly read this later on tonight.

He's reading this right now, "Hi chris"

Lol, but seriously he knows everything electricle about this car there is to know (as you said), so as said, he'll know someone down here in melbs.

If ya want the Stock Nav system to work it wont, forget it, guys have been trying to get it working in Aus for literally years. You probly know this already, but if you dont, if you want nav you'll have to go aftermarket, chris rogers does that aswell. For memory its like a flick switch, turnig it into nav mode (I apologize if wrong).

We just need another Chris Vistit to melbs, 2 votes so far.

Edited by BIGGERDave

buy me a ticket - easy. car gets done in boronia. I do not come down on my own accord (if I do NO ONE knows about it.) someone always flys me in.

this is how they work:

http://www.youtube.com/watch?v=pGyiOfF2z8s

Edited by Chris Rogers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...