Jump to content
SAU Community

Recommended Posts

Hi all

on my 32 GTST, when i attempt to press the brake pedal all the way to the firewall, the last bit of travel feels a little notchy or something, doesnt feel quite firm or "right"... Is this the flex people speak of? and would one of those cusco or UAS brace's solve the issue? or is it more likely an issue in the booster or master?

-Ryan

Link to comment
https://www.sau.com.au/forums/topic/289426-brake-pedal-feel/
Share on other sites

If the pedal is going *all* the way to the firewall, you've either boiled your brake fluid or somehow let air in the system. UAS only make a brace for R33/R34s, only master cylinder stopper I know of for R32s is the Cusco ones. I put a Cusco one on my R32 GTR and it reduced my end pedal travel and made the engaging point much earlier and firmer (whereas it was pretty spongey before)

doesnt go all the way to the firewall, but when pressing brakes completely, it feels notchy at the end of the travel

this is the unit that fits http://www.rhdjapan.com/jdm-low/Cusco-Brak...ECR33-R34-10799

haha im surprised how much better built stageas are considering they are the same platform.

anyway....get someone to pump the brakes hard while you watch the master cylinder.....you will see it moving as the firewall flexes. not sure if that is what you are feeling but it definately flexes without a brace

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...