Jump to content
SAU Community

Recommended Posts

As the topic indicated i have misfire at about 5.5k rpm and have got a second coil pack that i want to fit. However i only want to change the faulty coil. How do i diagnose which is the faulty one?

I would rather not run the car 5 cylinders red line the crap out of it

Any ideas?

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/289958-help-me-diagnose-my-faulty-coil/
Share on other sites

Usually the problem is a hairline crack in the coilpack body which allows the spark to follow the path of least resistance and arc to the head. Remove coil cover, move car to a dark place, start car, get someone to rev it while you try to spot which coil is arcing out....replace.

Moodles2 can you please elaborate on your post. You saying to buy a cable and run it from the ecu to the COMP and i need the program? Where can i download/ buy the cable?

I'm not sure if it will spit out any fault codes cause the check engine light doesn't come on, it is only really mild miss fire but still need to fix it!

If you have an R34 - Better get a set of new coils (splitfire brand). Once one coils starts to fail the others will not be too far behind.

Best get a new set it will save you hassle especially if you drive far from home alot.

Moodles2 can you please elaborate on your post. You saying to buy a cable and run it from the ecu to the COMP and i need the program? Where can i download/ buy the cable?

I'm not sure if it will spit out any fault codes cause the check engine light doesn't come on, it is only really mild miss fire but still need to fix it!

This only applys if you still have the stock ECU. Your Skyline has a fuse box under the steering wheel, inside is the Consult port (aka diagnostic port). With a Consult USB cable (http://ecutalk.com/interface.aspx) you can connect a PC or laptop and read sensor values, do active tests etc as long as you have PC software like OBD ScanTech (free) or Nissan DataScan (commercial), this is a screen shot of Nissan DataScan (commercial version not the cut down evaluation version) with the page to cut off spark to cylinders, effectively disabling them.

datascanactivetest.JPG

the problem with using the consult method is it isn't that reliable for what he wants to find out. at idle the weak coil may be firing fine and simply switching of cylinders won't find the dodgy coil.

swapping the coils out 1 by 1 will give the most accurate results, however if more than 1 coil is failing then it won't help much.

also, before you start swapping coils around, how old are you plugs, what gap are they, what heat range and what type are they? if you plugs are getting old and worn then they may be the problem and not the coils. in my case when i had a missfire it was caused by the plugs and not the coils.

far out i'm confused! lol yer well tonight i'm gonna pull it all apart and see wats happening under there :thumbsup:

Only problem is that it doesn't constantly miss! Last night on the way home it was running fine on full bost and the the red line, but the day before it was missing!

is the r33 series 1 coil pack the same as the series 2?

Edited by P1OTR
s1 has a seperate ignitor pack (same as r32). series 2 have it built into the coils (same as r34).

Thats right, I put r32 gtr coils in mine wen I had a miss. But does that mean all rb26 coilpacks are the same? or will the r33gtr ones be like the series 2 coils?

so in short i can't put an series 2 coil in a series 1?

nah man u cant, they simply wont ignite.there will b no connection.

series 2's hav their own igniters on each coil pack but a series one only has the one firing up all 6

the r33 gtr coils i have seen were like the s1 and r32, but i don't know what year series gtr it was.

ah true,,how many series 33gtrs are there? and wat r the differences

I have a set of s1 coils somewhere, what side of town are you Peter.

hey, he's mate of mine, he's down Narre side.

Ey Piotr,i got 4 good spare coils if u need, but if ur closer Madbung, go ahead

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...