Jump to content
SAU Community

Recommended Posts

Hi guys,

Yesterday i bought a 98 model R34GTT and i got a pre purchase inspection done on it from a well trusted performance shop, on the way home from a drive last night my wife noticed while she was driving that three lights had just come on in the instrument cluster.

Me not be of a mechanical mind i was wanting to know how to fix it and what the problem is that caused these lights to come on...

the lights that come on are:- TCS off / SLIP / ENGINE

when i turned the car off after we got home i turned the ignition on again and started the car and all lights went out as per normal.

any help would be greatly appreciated as i have been waiting nearly 2 years to get this car and now i finally got it i want to make sure it is in good working order.

Thanks for the hand.

KINGY

Edited by 18RZZ
Link to comment
https://www.sau.com.au/forums/topic/290512-r34-gtt-need-urgent-help/
Share on other sites

Could be the coil packs, they throw these lights up, normally accompanied with a rough idle though. Poor 5v feed to the TPS, TCS and Turbo pressure sensor can cause it also. Have a fiddle with all the plugs at the top of the engine.

Failing that run the diagnostic with a paper-clip (5 second job) and check the error codes that are stored-

diagnostic.doc

ive had my car 4 months now, it did that once, during a very big storm, no chance in idle tho.

it was co-indidently after putting in premium fuel at a local small servo...(had no choice), runs on ultimate every other time and has never had the lights come up.

so make sure its got good fuel in it

my car was doing this for a while, I found out when that combination of lights is on the error is most likely "primary ignition fault". My problem turned out to be coil packs, bought some split fires and changed the plugs and it went away.

Hi mate,

congrats on ur purchase. I have the same lights on my r34 too. After some research I can say it is most likely be the coilpack, as realor said, change the coilpack and it will fix it.

I have been meaning to change my but due to money I have left it for now. :P

Hey thanks for the help will have a look at coils, i know from the inspection i got done that the plugs are the wrongs ones so will change them when i go the coils.

i drove it around all day and the fault did not show up again so i have filled the tank with VORTEX 98 is this a suitable fuel or would you recommend another brand?

cheers once again and sorry for all the newb questions.

Also just quickly is there anyone who has had a problem with the factory disc player and screen not working i was told by the people i bought it off that iit would cost me about 500 to fix but if i know what to look for i can have i fixed by me at work for nothing?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...