Jump to content
SAU Community

Recommended Posts

Up for grabs is a built rb26 , it's got cp pistons and standard rods. was used for 6 months on standard computer

it has a arp stud kit and has the sump modified for rwd , it is welded up properly!

comes with wiring harness , computer , injectors and is a complete engine ready to drop in.

Has been on the engine stand in the garage for about 12 months , and has been turned over frequently.

It has polished rocker covers and a painted coil cover.

Comes with standard turbo's too.

Quick sale $2500 no offers!

pics comming . in fairfield thats nsw, inspections welcome.

Also 3 defi guages module and sensors , that is oil temp and pressure and exhaust temp , used but in as new condition , yet again been sitting around for a while , asking less than half what i paid , $500 no offers.

Turbo smart bov v port , brand new never used quick sale $180

pm for more details

Edited by burko1
Link to comment
https://www.sau.com.au/forums/topic/290669-rb26-defi-guages-turbosmart-bov/
Share on other sites

hey champ very interested in then engine, would you do freight to vic? at my expence of cause, this would bolt straight up to 33 gtst wouldnt it, im no wiz with this shit yet i have recently done bottom end in mine and wish to upgrade engine! cheerz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...