Jump to content
SAU Community

Recommended Posts

I already have a wolf3d V4 in my r32 with a 25det + gcg highflow. Now what is going to be easier to tune and give the better tune overall?

I realise buying a 20det ecu and nistune plus starting the tune from scratch is probably going to creep towards $1000 but I can get at least $500 for the wolf ecu. If I stick with the wolf ecu I will only need 2-3 hours dyno time ($300 ish) to get the tune tidied up (already has been tuned for 220kw run in tune) but it is not going to be as fuel efficient or idle as well, the reason being the stock ecu has fully sequential injection where as the wolf has to run batch mode (fires 2 injectors at once).

What would you guys do for a car in the 240-260kw range that is daily driven? Not to mention I have to go through regency (defect inspection) in the near future so I will need a stock ecu, the 20det ecu with a nistune will help me out here.

Edited by Rolls
Link to comment
https://www.sau.com.au/forums/topic/290801-wolf3d-v4-or-nistune-r32-with-25det/
Share on other sites

I already have a wolf3d V4 in my r32 with a 25det + gcg highflow. Now what is going to be easier to tune and give the better tune overall?

I realise buying a 20det ecu and nistune plus starting the tune from scratch is probably going to creep towards $1000 but I can get at least $500 for the wolf ecu. If I stick with the wolf ecu I will only need 2-3 hours dyno time ($300 ish) to get the tune tidied up (already has been tuned for 220kw run in tune) but it is not going to be as fuel efficient or idle as well, the reason being the stock ecu has fully sequential injection where as the wolf has to run batch mode (fires 2 injectors at once).

What would you guys do for a car in the 240-260kw range that is daily driven? Not to mention I have to go through regency (defect inspection) in the near future so I will need a stock ecu, the 20det ecu with a nistune will help me out here.

well if you have to go through the defect inspection thing, then id say the nistune, i have one in mine, loving it.

well if you have to go through the defect inspection thing, then id say the nistune, i have one in mine, loving it.

Yeah that's what I'm thinking, the wolf doesn't offer me any features that make the lack of sequential injection worth it and the fact it is defectable.

You might be better of running a z32 ecu plus nistune so you can take advantage of vvt.

My only gripe with the nistune is that you have no knock lite.

Yeah a knock light is a cool feature. You know whats even cooler?? Auto retard when knock is detected i'd think id rather save my engine than blow it up and know the knock count.

Edited by Crans

Hmm I've dropped the car off at boostworx. Maybe I will go pick it up (they haven't done anything yet) and do some more research and be 100% about what I should be tuning it with and who I should get to do it.

Really is a headf**k finding a good tuner and knowing what ECU to use. Really is hard to sort the good tuners from the bad tuners. Everyone has a different story about what ECU to use as well, like I'm talking 100% completely opposite opinions from well respected people.

Being as I have to go through regency and need the stock ECU I think the nistune really can't be that bad an option to go with though.

Edited by Rolls

uhh i dont remember saying i would rather a knocklite INSTEAD of nistune pulling a bit of timing out, Jus saying it's a handy thing to have diagnosing a problem that you dont know exists is kinda hard.

Yeah a knock light is a cool feature. You know whats even cooler?? Auto retard when knock is detected i'd think id rather save my engine than blow it up and know the knock count.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...