Jump to content
SAU Community

Recommended Posts

did a search, but came up empty

what's the size of a standard battery in a C34 S2 Stag?

i'm looking to get my hands on an Optima D34M, which is 10"x7"x 8" (254x175x200), LxWxH

is 200mm going to be too tall, and hence foul on the bonnet? might need a bit more than 200mm, after adding terminals etc.

thanks all :cool:

Link to comment
https://www.sau.com.au/forums/topic/291012-c34-s2-battery-size/
Share on other sites

mine came with a panasonic 220 or 250 cca piece on crap, i drained it in 3mins leaving headlights on!

looked like it would fit in a toddlers motorised car/motorbike that you buy from toys r us.

just poppin out to the garage to take a pic of the beast battery i put in and grab some measurements.

650cca from memory, about the same size you'd put in a 4wd or small truck :(

brb

It's an exide din 66

27.5cm long

17cm wide

18cm tall

i recon you could go:

- 18cm wide...tight fit.

- 28-29 cm long, but it will get close to the radiator, hose, inlet manifold and pickup more engine heat

which would be detrimental to battery life.

This is what i was worried about, but 2.5 years and it's still fine, no leakage/sweating.

- 20cm tall looks like it's ok and wont foul the bonnet. that would include terminal posts. (overall height).

Autobarn staff are normally very helpful and will help with a test fitment, chat to them.

ps. 610cca, as per the pic... and i've left lights on for 2hrs before at work and no sign of drain with this battery.

post-38314-1254904109_thumb.jpg

post-38314-1254904141_thumb.jpg

Edited by Stagea_Neo

As above mine came with a useless piece of ""it" Lasted about three weeks.

Got a Supercharge EG, 600 cca, 230 x 160 wide x 185 high excluding terminals. Never missed a beat and run 4 amp cooler all day no worries. Actually apart from a tie rod end it is the only thing I have HAD to replace in 31/2 years.

I would not recomend you put a optima in .

I work for a battery sales company and the optima are way too over priced and they have a warranty but to actualy use it is like pulling teeth.

if you need a battery with high cca out put but still an amp hour rating i would suggest you run a dry power 12v 26ah wich is what i have in my car.

they are lighter and smaller then a optima and still have good cca ( 600 cca @ 5sec) and good Ah ( 26amps @ 20min).

you should be able to get one of these from any battery shop , if they dont have a dry power you can use any SLA ( sealed lead acid) battery that is rated for cycle use and not stand by.

if you want any more info just ask.

I would not recomend you put a optima in .

I work for a battery sales company and the optima are way too over priced and they have a warranty but to actualy use it is like pulling teeth.

if you need a battery with high cca out put but still an amp hour rating i would suggest you run a dry power 12v 26ah wich is what i have in my car.

they are lighter and smaller then a optima and still have good cca ( 600 cca @ 5sec) and good Ah ( 26amps @ 20min).

you should be able to get one of these from any battery shop , if they dont have a dry power you can use any SLA ( sealed lead acid) battery that is rated for cycle use and not stand by.

if you want any more info just ask.

how much are the dry power batteries?

the D34M is sealed, deep cycle, 55ah and 750cca

can get one for $270 too, which is quite reasonable considering the RRP of $475

  • 5 months later...

Series II battery went dead the other day so I thought I'd let you reap the rewards of my research..

OE = 80D26R (cold weather spec.) (±260mm X ±172mm X ±225mm incl. posts) listed in no particular order..

Brand | Model | CCA| RC | Price | Origin

Century | NS70X | 545 | 130 | $225 | Australia

Exide | N50ZZMF | 600 | 130 | $??? | Australia?

Bosch | 90D26R | 620 | 140 | $215 | Unknown

Bosch | 110D26R | 680 | 160 | $lots | Unknown

Supercharge | MF80D26R | 670 | 140 | $135 | Philipines

ALCO AtlasBX | 90D26R | 630 | 130 | $150 | Korea

ACDelco | S80D26R | 600 | 130 | $??? | Korea

Enjoy!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha this shit box doesn't drink coolant, for now       Let me guess, they make heaps of power, use the car for straight line driving and don't care about noise
    • They’re so great that I know of someone pulling one out to go back to a sequential 
    • Hello everyone. I've recently started the research into R34 GTR front bits and running into eye watering prices. On the plus site it looks like some places make 'replacement' fender liners for these cars. At eye-watering-but-less than stock prices. I also noticed there's plenty of diffuser options available too. What I would like to know is if my following assumptions are correct. 1) The OEM guard liners are actually only 'half' the liner. They go together with the OEM brake vents which are a separate item which looks to be quite a large 'panel' that is part of the liner. The GTR bumper has bolt holes along the front. I assume the ones in the vent correspond to the ones the OEM liner does not have (circled?)   2) The V-Spec front diffuser supplants the brake ducts in the above item. I am assuming these still work with the guard liners as there's no alternate part that I'm aware of. I don't see how they go together, so I'm making the assumption that they have to, somehow. I know the center splash guard is different on the V-Spec (and is the price of the damn diffuser alone). How does the liner interact with this? 3) There's alternate front diffusers that do away with it all. Annoyingly, a lot of the clones and CF different ones... have no brake ducts on them. I like the idea of them though. My brakes get hot on the track. These alternate diffusers are a lot cheaper than plastic splash guards. I'm assuming you don't have to/aren't supposed to remove guard liners to run a diffuser. I suspect that quite a few people actually do not run the guard liner because with a front undertray you're getting a lot of 'splash' guarding anyway, and most people remove liners given they're probably running a pretty aggressive setup with a diffuser at the front. It would also be nice to know if anyone has ever run the 'reproduction' guard liners and know whether the fitment is OEM quality or "OEM Quality". Example: https://www.ebay.com.au/itm/356254671561 https://carbonetics.net/products/nissan-skyline-r34-gtr-plastic-front-wheel-arch-set Is this knowledge still around?
    • Really, effort is pretty low. You hand fistfuls of cash over to someone else and pick it up when done...   And at least this shitbox isn't drinking coolant right?  
    • And most chargers that most DIY people own would put bugger all power back into the battery between cylinders. I've always done it with jumper packs/second battery connected. And that's on any car.   Because race car, and wanting the lightness.  At least in an R33, putting a bigger battery in can at least help shift the weight balance backwards  
×
×
  • Create New...