Jump to content
SAU Community

Car broken into, stereo stolen, dash trashed.......time to vent


Recommended Posts

G'day All,

Well, phuck it, guess it was bound to happen to me, but my car was broken into day, and yeah, as you can imagine phucken pissed off right now.

To make matters worse, my car was parked in the office 'secure' car park...........yeah secure my phucken ass, and yeah, after a shitty day at work....not impressed at all right now.

So is there anything which I can do.....police statement has been taken down, but I'm not holding my breath. Phck I have a thirst for revenge right now, but yeah, going to have to conseed to the fact that I can only try to repair whats damaged, and yeah, try to make my car right again.

So what happened?? Had my car parked at 300 LaTrobe st Melb in the Wilsons car park. (where I work) came back to find damn, my passenger window looks light (tinted as it should be)

Jaw dropped, glass everywhere, looked at the dash. Surround was snapped and ripped off. Panel around the auto t-bar ripped off and all scratched up........wires everywhere........ what else can i say........these guys seemed like professionals, there was other stuff of value, but i guess luckily, they just went for the deck, and nothing more.

So guys, if oyu see a Pioneer DEH8400 (american version of the 8450) the volume dial scratched up, for sale......meet the seller, and beat the phuck out of him.........I'm mean literally phucken kill the sonofabitch

Anyway, looking forward, if anyboyd has the following, please pm me as I desperately need the following for a R33 GTST:

left passenger window

dash surround (the one that goes all around the dash.......beside steering column, around the stereo, climate control etc

gear shift for automatic surround

Please excuse my grammar, (see thread in Wasteland forum) just cant be assed writing properly, but yes, if you have any of these parts available I would extremely greatful

shouldnt security car park have cameras?

did they charge you for parking in the secure parking? if they did get it back because they did **** all of a job, and ask to see cameras, if no camera's, suspect inside job, or just suspect anyone and **** them over some how

yeah, good idea sars.....mine was in the boot......stupid i know......and yeah, they new where else to look. fortunately nothing else of value was stolen............sars i guess you can check it out yourself when you check out the pod filter

autotrust are you there............i presume no doors were open so no alarm went off...

car wasnt stolen, if thats any consolation and yes I could see the key barrel being tampered with.

Phuck the skyline curse............yeah not much luck of late, but refuse to let some phucker ruinmy car, and make me scared of putting nice things in it..........so the way I see it, phuck it, and I'm going to get something better!.........could be hard and pricey upgrading a pioneer 8400 tho.......:rolleyes:

Sorry to hear Scotty :rolleyes:

Have you spoken to Wilson parking? If more than one car was hit on the same day - the Police might be investigating a little harder than usual.

Scotty, I feel sick :spew: , another skyline trashed for the deck. Depending on what they broke the window with depends on whether the shock sensor would have picked it up, if you have one. maybe a paging alarm is in order, you would have to be sure that you park within it's range to be effective. Tracking systems are too expensive and it can take 5 mins for them to call you if they get an alarm. Not many wreckers in melb have skyline parts at the moment, but this place may,TOP jap autos 9791 1811 (dandy) i don't like these guys due to their phone manner but if they have parts who cares right.Let me know if i can help, good luck with your repairs. :headshot:

G'day Autotrust, gave the guys a call in dandy, and yeah, phucken phone manner was atrocious! Couldn't even understand him.......anyway, all he's got is the glass.......$150!! phuck!!

Hey, I'm going to gaffa's tonight, hopefully he can help me at least pull my door apart and clean all the glass shards that have fallen through.

Pushhead.......thanks for your comments bud.....as the saying goes, when it rains it pours.......and of late a lot, and I mean ALOT of money has been pouring out of my wallet. *sigh* So how can I beat these phuckrs!

All those apparent secure carparks are farking useless.

They make so much $$ everyday, yet pay the workers there peanuts thats y they dont give a shit even if they hear a car alarm go off they wont get off their asses to go check.

I suspect an inside job if u park there everyday and didnt have an alarm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...