Jump to content
SAU Community

Rb25 Custom Inlet Manifold, 4x Mt/bf Drag Radials On Rims, Blitz Dsbc Sr Boost Contoller, R32 Tomei Headlight Intake

Clint32
 Share

Recommended Posts

Clint32 Mentor

Clint32

Posted
Posted

Selling the remaining parts from my project 32

Custom inlet manifold for RB25, modified std runners - old Subzero type one, with 70mm? 5ltr holden throttle body

Includes alloy fuel rail with 75lb ~800cc Holley injectors

Sard pressure reg

Injectors, reg and fuel rail were new, mainfold SH but polished up

$1000

Blitz Duel SBC spec R boost contoller, fitted but as new, includes all wiring etc, $400

Tomei R32 headlight replacent intake, painted black, as new, $250

2 x MT Drag radials, 255/50R16, 80% tread remaining mounted on polished 5 spoke wheels (std toyota of some sort) 16x7.5 + 50?, perfect offset for my 32 with +1 camber for the drags, with wheel nuts to suit wheels, $400

2 x BF goodrich draf radials, 255/50R16, 80% tread remaining mounted on polished 5 spoke wheels (std toyota of some sort) 16x7.5 + 50?, perfect offset for my 32 with +1 camber for the drags, with wheel nuts to suit wheels, $400

Parts in Adelaide but can arrange shipping of all items, emails [email protected]

post-429-1255328890_thumb.jpg

post-429-1255329383_thumb.jpg

Clint32 Mentor

Clint32

Posted
  • Author
Posted

Will get some pics of headlight and other stuff later today hopefully, cheers

pics of head light intake? very keen
Clint32 Mentor

Clint32

Posted
  • Author
Posted

Will find out for you, can you please pm me address or at least post code, thanks

keen on the rims and tyres mate how much would it cost to freight to gold coast?

cheers

Clint32 Mentor

Clint32

Posted
  • Author
Posted

Pics of intake and the 2 MT drag radials, the wheels and the condition of the BF ones are the same, just need to dig them out to get some pics

post-429-1255553229_thumb.jpg

post-429-1255553666_thumb.jpg

post-429-1255553844_thumb.jpg

Roy Grand Master

Roy

Posted
Posted
Blitz Duel SBC spec R boost contoller, fitted but as new, includes all wiring etc, $400

To clarify, Spec R? Wouldnt happen to be an Spec R ID?

600x250-2008013100006-3.jpg

461x228-1255503827858703_dsbc_r.jpeg

Timbosaurus Apprentice

Timbosaurus

Posted
Posted

G'day Mate, would you mind doing me a favour... when the tyres are lying on the ground, how many mm's to the mounting hub face (lying facedown and backdown).

I know you've given the offsets and tyre width etc, but it's going to be really tight on my car, so I'd like some exact figures if possible :whistling:

Thanks again,

Tim

Clint32 Mentor

Clint32

Posted
  • Author
Posted

Roy, no its the one in the lower pic, the std Spec R i think

To clarify, Spec R? Wouldnt happen to be an Spec R ID?

600x250-2008013100006-3.jpg

461x228-1255503827858703_dsbc_r.jpeg

Clint32 Mentor

Clint32

Posted
  • Author
Posted
G'day Mate, would you mind doing me a favour... when the tyres are lying on the ground, how many mm's to the mounting hub face (lying facedown and backdown).

I know you've given the offsets and tyre width etc, but it's going to be really tight on my car, so I'd like some exact figures if possible ;)

Thanks again,

Tim

With wheel/tyre flat on ground,

overall height of tyre at the biggest boldge = 260 mm

ground to wheel mount flat = 180mm

this would make sence, as the wheels are marked +50, half distance is 130 + 50 = 130

They fitted nice on my 32 gtst with camber set as it was, also had adjustable rear camber arms. Not sure if at one point I had to use 5mm spacers to get them to clear with different camber/control arms. But the tyres are worth it by themself so the wheels are just a bonus. Hope this helps

BASHO Mentor

BASHO

Posted
Posted

Blitz Duel SBC spec R boost contoller

Would this be the right one for an R34GTT or would it be the spec S silly question maybe but I just don't know. :down:

Clint32 Mentor

Clint32

Posted
  • Author
Posted

The boost controller will work with any turbo, the spec S uses a different boost control solenoid, the spec R one has a better solenoid to contol the boost, hope this helps, cheers

Blitz Duel SBC spec R boost contoller

Would this be the right one for an R34GTT or would it be the spec S silly question maybe but I just don't know. :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • MBS206
      RB25DET with solid lifters - which cams ?

      By MBS206 · Posted

      Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • MBS206
      NC MX5

      By MBS206 · Posted

      They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...