Jump to content
SAU Community

Recommended Posts

iirc, it was a 4 door and didn't have the full lower spoiler sections, both front, sides and rear. but, could have changed since then.

responding to me?? lol i dunno what iirc means

this one is a white coupe with the full kit, seats and eastbear GTsR badge

  • 2 months later...
someone in perth owns eastbears ex-demo car

old thread dig... :) Yep that's me. I bought the white ex demo car from East Bear thanks to Jeff at C-Red Tuning in 2008. It was an also at a price too good to refuse. The only external change I've made is fitting a GTR wing.

  • 4 weeks later...

Hey Guys,

I am planning on getting the East Bear Kit too.

Am in the process of talking to East Bear Japan atm so will let you know how it goes.

oh and does anyone know whats going on with Anthony at Aero Image, because i heard he is going to make replicas but he never seems to reply.

Cheers

Daniel

Hey everyone,

i will post this aswell in the group buys section but just seeing who is actually interested in buying the GTS-R Body kit made by East Bear Sports.

i have been talking to them latetly and pretty much the one thig that will be the major cost is shipping but essentially if we have for eg the purchase of two kits it cost the same amount to ship/fly

i have asked them about dropping the price on the kit but the will not give a discount on multiple kits but will give discounts on extras that anyone might want such as the GTS-R badges, Tail Lights, Rear Diffuser and Fender Cover.

Currently the Yen is floating around the 80-82 dollar mark.

the following are the prices in YEN and AUD also some pretty pics for people to look at of the parts though im sure u already know what everything looks like.

The Full Kit shown below Includes

  • Front Bumper
  • Front Lip (type 1)
  • Side Skirts
  • Rear Bumper
  • Under Spoiler (front and side)
  • Carbon Vented Hood

post-68428-1266737964_thumb.jpg

The total cost for this is 338100 Yen which with the current Exchange rate is $4124

If you dont want the Carbon Hood or a Vented Hood It will be Cheaper and if you dont want the under spoiler it will be cheaper

Next up is the actual GTS-R emblem

post-68428-1266738112_thumb.jpg

post-68428-1266738145_thumb.jpg

this is 3150 Yen Which is $38 but like i said we will recieve a discount

Next are the East Bear LED Tail lights

post-68428-1266738208_thumb.jpg

They are 44100 which is about $538 and again we will recieve a discount on them

Next is the Rear Diffuser which can either be Carbon or FRP but the price is the same the picture didnt seem to work but the price is 69300 which is about $845 As with others we will get a discount.

post-68428-1266738253_thumb.jpg

Last is the Fender covers and for the set of four is 39900 which is about $486 discount applies for the fender covers aswell

post-68428-1266738297_thumb.jpg

post-68428-1266738329_thumb.jpg

With the matter of shipping or air frieght the price can be given when i get an idea of who wants in.

if anyone has questions they want to ask or if anyone wants to call me i can pm my number just let me know

Cheers

Daniel

  • 4 weeks later...
is it possible for me to just order the type 1 front lip? if so how much?

yeah you can just get the front lip it is 33600 Yen and with todays great exchange rate of 83.33 it around 400 AUD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...