Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

What size rear has the turbo got Abe?

I think the Garrett 3076R(3037S) is a 0.82

little bit of a lean spot there at 160kph....just monitor your knock count

Are you talking about the 262kw graph or the 149kw graph?

If the 262kw graph, if i am not happy with the tune i can take it back and get it touched up for free :), he didn't really have much to go with as it was a whole new tune, so he got it to where he was happy with it and gave it back to me. If there are some niggle bits i am not happy with, he will sort it out, see how we go on the way to Loxton. But i will rarely be driving at 160kph, if at all.

u can see the lean spot in the first 149kw graph that you posted. there is a big drop in the afr line.

ur new tune looks good :)

Ah...well the 149kw graph is stock...stock everything other then a podfilter.

just bought an RB20 + gearbox + FMIC + ecu, afm, loom +3'' zorst for 1100.

bargain? yes.

entirely happy? no its missing .5 of a liter in capacity but oh well, its a budget build.

specially when its gettin fitted and wired by a effing champ in swaps for the RB30 :)

cant wait.

pretty keen to build it up in almost every area, inherited some pretty average suspension in the car so probably looking at coilovers as my first upgrade. gunna go for the BC br range i recon, cant seem to find any negative feedback on them and they are sweet price.

pretty keen to build it up in almost every area, inherited some pretty average suspension in the car so probably looking at coilovers as my first upgrade. gunna go for the BC br range i recon, cant seem to find any negative feedback on them and they are sweet price.

buy decent quality straight off the bat. please. save for an extra week or 2 and buy cusco's or something.

I think the Garrett 3076R(3037S) is a 0.82

.82 rear, thats why its a bit laggy, but u got more topend out of it

since u cant check ya knock level reading just keep an eye on ya engine warning light, if it starts to come on regulary after a boosting hard step off and getnya tuner to check everything again (timing)

just bought an RB20 + gearbox + FMIC + ecu, afm, loom +3'' zorst for 1100.

bargain? yes.

entirely happy? no its missing .5 of a liter in capacity but oh well, its a budget build.

specially when its gettin fitted and wired by a effing champ in swaps for the RB30 :)

cant wait.

nice deal Graig

and who is this CHAMP that is wiring it up for u??

buy decent quality straight off the bat. please. save for an extra week or 2 and buy cusco's or something.

fair enough, might have a look into it a bit further. im normally pretty keen to do everything the right way. to me these coils looked like a fair deal.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...