Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

What size rear has the turbo got Abe?

I think the Garrett 3076R(3037S) is a 0.82

little bit of a lean spot there at 160kph....just monitor your knock count

Are you talking about the 262kw graph or the 149kw graph?

If the 262kw graph, if i am not happy with the tune i can take it back and get it touched up for free :), he didn't really have much to go with as it was a whole new tune, so he got it to where he was happy with it and gave it back to me. If there are some niggle bits i am not happy with, he will sort it out, see how we go on the way to Loxton. But i will rarely be driving at 160kph, if at all.

u can see the lean spot in the first 149kw graph that you posted. there is a big drop in the afr line.

ur new tune looks good :)

Ah...well the 149kw graph is stock...stock everything other then a podfilter.

just bought an RB20 + gearbox + FMIC + ecu, afm, loom +3'' zorst for 1100.

bargain? yes.

entirely happy? no its missing .5 of a liter in capacity but oh well, its a budget build.

specially when its gettin fitted and wired by a effing champ in swaps for the RB30 :)

cant wait.

pretty keen to build it up in almost every area, inherited some pretty average suspension in the car so probably looking at coilovers as my first upgrade. gunna go for the BC br range i recon, cant seem to find any negative feedback on them and they are sweet price.

pretty keen to build it up in almost every area, inherited some pretty average suspension in the car so probably looking at coilovers as my first upgrade. gunna go for the BC br range i recon, cant seem to find any negative feedback on them and they are sweet price.

buy decent quality straight off the bat. please. save for an extra week or 2 and buy cusco's or something.

I think the Garrett 3076R(3037S) is a 0.82

.82 rear, thats why its a bit laggy, but u got more topend out of it

since u cant check ya knock level reading just keep an eye on ya engine warning light, if it starts to come on regulary after a boosting hard step off and getnya tuner to check everything again (timing)

just bought an RB20 + gearbox + FMIC + ecu, afm, loom +3'' zorst for 1100.

bargain? yes.

entirely happy? no its missing .5 of a liter in capacity but oh well, its a budget build.

specially when its gettin fitted and wired by a effing champ in swaps for the RB30 :)

cant wait.

nice deal Graig

and who is this CHAMP that is wiring it up for u??

buy decent quality straight off the bat. please. save for an extra week or 2 and buy cusco's or something.

fair enough, might have a look into it a bit further. im normally pretty keen to do everything the right way. to me these coils looked like a fair deal.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...