Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

I have nothing against rotary engines, in fact I love them and the sound they make, but I have to agree with the whole 3.9L displacement argument as each rotor has 3 combustible sides to it for every one rotor revolution (not crank or eccentric shaft revolution).

Yeah that's true but only one side of the rotor get's used per revolution of the output (Eccentric) shaft so there for only 1.3 litres (0.66 x 2 for a 13B) gets used per revolution. You need to forget about the revolution of the rotor becasue everything is measured (RPM and Power) on the output shaft on every engine. You never see a piston speed gauge on your dashboard do you. It's like saying that the rotation of the cam shaft is vital to the running of a 4 stroke engine so really the redline of our nissan engines is really around the 3750 rpm mark.

what is this? i know its a drive shaft.. or is it drive shaft AND tail shaft....

it come out of teh vl with 20, so is it specific to vl rb20 or will it suit 25, 30, R31's etc?

sellin it on ebay thats all :laugh:

Image042.jpg

Edited by craig R33

the output shafts for RB30e and the RB20 gearboxes are the same so it's a VL tailshaft and will suit anything with either of those GB's. I haven't mentioned the 30et's because i'm not sure if the output shafts are the same, as i'm lead to believe that they had a stronger box so they may have a different output shaft.

Edited by D_Stirls

go for it, what have you got to lose. It's much the same as just pulling the engine out and putting it back in with the nissan stuff as it's all pretty modular.

My conversion for instance;

RB25 > S13

-Use a Cheffy X member that bolts straight up to the S-Series chassis rails.

-Then use RB20 Engine mounts brackets, that bolt straight up to the 25

-Use some off the shelf rubber mounts (i have some ideas here but we'll see if they will work and or be an improvement on the RB20 mounts.

-The only bit that has to be custom made is the gearbox X-member, which is no problem for me and infact i'll be making up some CNC brackets that Matt can then sell.

-Almost forgot the custom tail shaft which will cost $250 for an engineering fabriction place that makes tails shafts.

There you go the mechanical part is done.

Edited by D_Stirls
hoooon.jpg

Stolen from ns.com but lol's all around... Fast and the Furious-styles.

ive seen worse ones, that are obviously made up,

one of a skyline i think that was "going too fast for me to get the number plates" or "car was drifting behind me so i pulled over because i was scared"

so, had a couple problems with the 200 at the track day;

http://www.skylinesaustralia.com/forums/Fu...ge-t293848.html

any help would be rad.

EDIT: luke loves the buttsecks

Edited by scandyflick
so, had a couple problems with the 200 at the track day;

http://www.skylinesaustralia.com/forums/Fu...ge-t293848.html

any help would be rad.

pathetic

while im all for a laugh, this is about 12 months too old

-D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Stop looking at the garage floor, and turn the radio up a bit louder if there's any strange noises...
    • No. Turbo shuffle and surge/flutter are not the same thing. Specifically, on a GTR, turbo shuffle has a definite meaning. On a GTR, the twin turbos are assumed to be the same thing and to operate the same way, exactly. In reality, they do not. Their exhaust sides are fed and exhaust a little differently, to each other. Their inlet sides are fed and exhausted a little differently, to each other. Consequently, when they are "working" they are often at slightly different points on the compressor map compared to each other. What this means, particularly when coming on boost, is that one of them will spool up and start producing extra flow compared to the other, which will put back pressure on that other compressor, which will push the operating point on that other compressor up (vertically). This will generally result in it bumping up against the surge line on the map, but even if it doesn't, it upsets the compressor and you get this surging shuffle back and forth between them That is "turbo shuffle" on a GTR. It is related to other flutter effects heard on other turbo systems, but it is a particular feature of the somewhat crappy outlet piping arrangement on RB26s. There are plenty of mods that have been attempted with varying levels of success. People have ground out and/or welded more material into the twin turbo pipe to try to prevent it. Extending the divider inside it works, removing material doesn't. There are aftermarket replacement twin turbo pipes available, and these exist pretty mush purely because of this shuffle problem.
    • You can temporarily* use lock collars to keep it in place until you can do the bushes, back the nuts off, slide them in, snug back up. *temporarily is often for ever
    • Thanks for the quick reply. To be clear, when you say turbo shuffle do you mean turbo flutter "stustustu" or referring to something else? I had thought they were the same thing. When I wrote the post my intention was to say it wasn't a flutter/compression surge sound. My understanding was that a flutter sound would be occurring when throttle is released, whereas I can keep the throttle in the same position for this noise
×
×
  • Create New...