The Sa Wasteland

[nicr4wks]

lol cause the new 1s arnt informative

Guess instead of informative i should have used, funny, entertaining reads?

[Inline 6]

nah there not that either stop talking them up

lol at the straight f off response

http://www.skylinesaustralia.com/forums/Dr...ce-t295216.html

[scandyflick]

^^^ Hayden Panatierre.. I would so silly, silly things to her.

no you wont. you wont even do silly, silly things to girls that are gagging for it.

[DamageInc]

no you wont. you wont even do silly, silly things to girls that are gagging for it.

all you have to do is flop it out.

in other news , rear main seal is fine! woot

chucked it up on the hoist at my mates work today and it was the oil drain hose that had a small hole in it , put some gasket sealer on it and its all sweet for now , when i get more cash ill get

a new hose and fit it when i do oil change next

[Luke_ENR34]

Ordered my heater hose set today Thanks MOB

Sold my stockies Thanks Sam

Called regency and they said a after market fuel rail is fine

[scandyflick]

ugh. what a fail. ns is down and i need to order a pair of bushes to get the 200 rolling again.

[Boost1n-Et]

ugh. what a fail. ns is down and i need to order a pair of bushes to get the 200 rolling again.

Working fine for me,

[heslo]

Ordered my heater hose set today Thanks MOB

Sold my stockies Thanks Sam

Called regency and they said a after market fuel rail is fine

Really?

[Luke_ENR34]

Yep, called up asking about is it ok cause i cant find a second hand one and he's like yeah there fine aslong as it has some writing saying its for fuel its fine.

So i might get a Sard one and put a little note on it and away i go.

[Matty 31]

LOL! i have many parts on the 31 club for sale, most have been sold cheap ha just to get rid

of it, like standard rb20 turbs+ dump for 50 bucks, coz thats how i roll....

i also have the 2,5'' cat back on there for 50 bucks, some doosch just offered me 20 bucks haha

c'mon, fifty is already cheap.. where do some people get the nerve?

welcome to the R31 Lowball Club Craig LOL

[skwiz]

"Where in theory you can get anything for nothing"

[D_Stirls]

Yep, called up asking about is it ok cause i cant find a second hand one and he's like yeah there fine aslong as it has some writing saying its for fuel its fine.

So i might get a Sard one and put a little note on it and away i go.

Your problem is going to be the FPR. An aftermarket rail isn't going to fit the factory FPR, but if you have an aftermarket FPR then they will crack the shits because you can adjust your AFR's by playing with the fuel pressure.

Edited November 12, 2009 by D_Stirls

[heslo]

Your problem is going to be the FPR. An aftermarket rail isn't going to fit the factor FPR, but if you have an aftermarket FPR then they will crack the shits because you can adjust your AFR's by playing with the fuel pressure.

My thoughts exactly

[Luke_ENR34]

God damm, one problem leads to another lol thanks Dale.

Also Luke, Rory Thompson can engineer your cf bonnet for roughly $250, as i was speaking to a R34 GTR owner on sunday saying Rory engineered his Z-tune one no problems.

[heslo]

God damm, one problem leads to another lol thanks Dale.

Also Luke, Rory Thompson can engineer your cf bonnet for roughly $250, as i was speaking to a R34 GTR owner on sunday saying Rory engineered his Z-tune one no problems.

Very interesting Luke, cheers for that, I'll have to call him but it may not be possible. I think it needs an aluminum frame to be engineered but I will call just to see anyways

[craig R33]

FINALLY picked up my new turbo after calling speedlab jeff for nearly 2 weeks...

ended up just going to JPI and givin them the cash, even had to take it off the rb20 myself (on works time hehe)

[Luke_ENR34]

Very interesting Luke, cheers for that, I'll have to call him but it may not be possible. I think it needs an aluminum frame to be engineered but I will call just to see anyways

This one had no alloy frame and was brought from cartoys for $700. Also got his Greddy coilovers done and all his Cusco suspension arms. The coils didnt have to be welded up either.

[SLED]

God damm, one problem leads to another lol thanks Dale.

Also Luke, the amount of gain you would get out of an aftermarket fuel rail would be nigh on zip for the amount you'd pay for it.

Not to menion that shiny rails draw too much unwarranted attention which is the last thing you'd need.

There are so many other things that your $$$ would better benefit your car, ie. decent delivery and return lines etc.

[DamageInc]

Also Luke, the amount of gain you would get out of an aftermarket fuel rail would be nigh on zip for the amount you'd pay for it.

Not to menion that shiny rails draw too much unwarranted attention which is the last thing you'd need.

There are so many other things that your $$ would better benefit your car, ie. decent delivery and return lines etc.

qft

[heslo]

This one had no alloy frame and was brought from cartoys for $700. Also got his Greddy coilovers done and all his Cusco suspension arms. The coils didnt have to be welded up either.

2JZ no shit?

I will have to make a call to Rory and see what the story is. Anyone have his number?