Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

While I'm here ...

Can anyone tell me, or point me to a link, as to how a GTR/260 gearbox pull-type clutch fork mates up with the pull-type clutch kit, so the clutch engages properly. Push type I know you just slide things on. But is there a trick to fitting the GTR box to a pull type pressure plate and carrier?

Thanks >_<

while i was picking up my car i asked this qeustion today as my intention was to drop by and help.... unfortunataly i didn't sleep last night and afterwashing my car i had a quick cat nap that i only just woke up from =\

i know there a BARSTARD to get off (right matty/blue 32) =P

but apparently you can assemblem the forks and everything and then set up the thrust bearing and just "click" them into place! soooo much easier than removing them!

That's 'cos I killed the pigeon with my gas when I was changing your turbo

normally id be inclined to agree, but i didnt put the hks piping on until just before the private day.

Chuck up some specs :)

Its a 88 model was auto by the looks of it, RB20 it pretty much stock engine wise. Its supposed to has a Autech ball bearing turbo, Nismo suspension and a fairly new Exedy clutch which a cant seam to take off without chirping the rears :D It def needs moar powers as it has trouble spining the wheels in second. Rims are 15's with 205's so i'll keep them for sliding as they are easy to replace and i'll see if my drifteks fit on the front.

What should RB20's rev too? 7000?

Most definitely.

1998 Black R33 GTR series 3.

~100k km,

400R Front Bar,

HKS 2530 turbos,

18" Nismo LMGT4 wheels,

Loud. Fast. Unbelievable!

PM me if you want to know more.

dang it, i so didn't want anything to do with this thread grrrr

Its a 88 model was auto by the looks of it, RB20 it pretty much stock engine wise. Its supposed to has a Autech ball bearing turbo, Nismo suspension and a fairly new Exedy clutch which a cant seam to take off without chirping the rears :D It def needs moar powers as it has trouble spining the wheels in second. Rims are 15's with 205's so i'll keep them for sliding as they are easy to replace and i'll see if my drifteks fit on the front.

What should RB20's rev too? 7000?

be more aggresive with the clutch, 20's got enough power to slide a ceffy lol

be more aggresive with the clutch, 20's got enough power to slide a ceffy lol

Pretty sure its just running standard boost, its not very fast atm. It may still have an auto diff as well which wouldn't help.

Its a 88 model was auto by the looks of it, RB20 it pretty much stock engine wise. Its supposed to has a Autech ball bearing turbo, Nismo suspension and a fairly new Exedy clutch which a cant seam to take off without chirping the rears :D It def needs moar powers as it has trouble spining the wheels in second. Rims are 15's with 205's so i'll keep them for sliding as they are easy to replace and i'll see if my drifteks fit on the front.

What should RB20's rev too? 7000?

Sounds like awesome fun man.

I'd be inclined to rev a Rb20 to like 7,500?

God hearing about you having a track cars really gives me the itch to hurry up and convert my S13 to manual.

hmmm

Im off for a spin in the hills

wish I could sort out my ecu and get back to 7200rpm limiter

currently cuts at 6500, some sort of issue with the AEM F/IC-8 ecu I have, as the remaped stock ecu is set to 7200

meh, changes gear right in the meat of the power delivery so it isnt too bad.

surprising tho that a little 700rpm means my car is down ~15rwkw

ie 6500rpm = 240kw, 7200rpm = 250kw+ going by the dyno graph(s)

Sounds like awesome fun man.

I'd be inclined to rev a Rb20 to like 7,500?

God hearing about you having a track cars really gives me the itch to hurry up and convert my S13 to manual.

RB20's semi redline at 7000 and full redline 7500.

My limiter was ~8000rpm.

Went for a spin in my managers R33 S2 tonight lol, it did give me a Skyline fix thats for sure.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...