Jump to content
SAU Community

Recommended Posts

so got myself a trailer from mad automotive for the weekend of stadium drift,,,

pickup friday night, drop off sundayby 12 noon = 85 bucks.... bargain much?

cooks trailers was 120 for 2 days

cluse bros tyres was 160 for 2 days

and ''move yourself'' was 190 for 2 days...

pays to shop around!

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

help plz - trying to get left rear hub off my stagea (replace studs and foot park brake pad)

undid the 36mm Nut with a breaker bar this morning, but cant budge the hub itself

soaking in rusteze spray at the moment

just keep hitting it with a hammer from various angles to dislodge it?

having trouble, seems firmly stuck on.

so got myself a trailer from mad automotive for the weekend of stadium drift,,,

pickup friday night, drop off sundayby 12 noon = 85 bucks.... bargain much?

cooks trailers was 120 for 2 days

cluse bros tyres was 160 for 2 days

and ''move yourself'' was 190 for 2 days...

pays to shop around!

thats decent as fek. Very nice. I'm hesitant to skid at Tailem Bend, I don't trust myself and that drop off around the track lol. Feel way more safe at lala' to be honest

right, so you would know that the ditch isnt all the agressive, and it will only effect you if you go to hard in the final s's....

out of all the noobs there first skid day, how many went in the ''ditch''?

id rather go in the ''ditch'' than hit tyres/concrete wall at lala

If there is anyone that has recently purchased a house and land package or is looking to do so... then there is a Market Research thing on this Sunday for 1.5 hours and you get $100 bux cash for it- No strings attached! I think you may need to be under a certain age but if you want to know then call 82932800 for the details and you can say that I told you about it.

This isnt spam or nothing by the way, just a quick way to get $100 so thought I would share. :(

Just re-checked my flight paper work before.

I have to fly to East Timor tomorrow :) then from there to the helicopter then the rig!

Hopefully I dont get shot or taken captive haha.

good luke mate!

should be an adventure

-D

EDIT - Having been shot before - just make sure if they do shoot u, they get u in a lower limb or a superficial gut wound ;D

thats decent as fek. Very nice. I'm hesitant to skid at Tailem Bend, I don't trust myself and that drop off around the track lol. Feel way more safe at lala' to be honest

More chance of hitting the big inside ripple strips at Mallala and rolling it than rolling it at Tailem. I've had airtime into turn one before and its pretty exciting that's for sure :)

Hey Luke, got a new clutch plate coming soon, hope to have it next week. Then we can get my POS off of ya hoist.

hopefully it got airbagged today but we will know tomorrow :)

Dion and Fabs your clutch's are here

Street Clutch

post-13315-1279804911_thumb.jpg

Drift Clutch

post-13315-1279804938_thumb.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...