Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

What is a really good spray on wipe off product for a cars exterior? To give it a good temp shine. Heard of it but can't recall what it was.

Meguairs Quik Detailer for quick clean outside

I got a cleaning product from meguiars for every part of your car Ruby :laugh: ill have it all with me later.

I thought I might try having a go fitting up the Blitz LM FMIC I bought ages ago.

Unfortunately, I can't get it to fit without cutting the reo - which is something I really didn't wanna do (specifically bought the Blitz cos I was assured I wouldn't need to cut reo).

... pondering taking a pass on it and selling it on now ... *sigh*

I've spent most of this week off sick, and got frustrated driving my other car all the time... Thought I'd rip the reo off and size up how bad the situation was.

So, removed reo, mounted the FMIC up, making sure it was high enough that the the bottom return pipe fits under the undertrays. So, assessing the reo, there's no way it can even fit no matter what I do - it hits on one of the top mounts. Sits perfect on the passenger-side, but drivers-side - not a chance - even if I moved the FMIC across as far right as I could. I'm bloody confused and exhausted :laugh:

Top view:

20100806_top.jpg

No way that it's gonna fit under that mount:

20100806_left.jpg

Fits perfect here:

20100806_right.jpg

I'm just about ready to give up - anyone have any ideas..? :/

Gotta love bogan chicks in jap cars!

Heading up Greenhill Road in the middle lane (west bound) a car in the left lane is turning down a side street to Wayville, and the chick in the Liberty behind it swerves into my lane, forcing me to brake and swerve into the right hand lane. I'm on my horn and my brakes, then after she moves back into the left lane and I move back into the middle lane, she's giving me the finger and mouthing "f**k off" to me???

Cars all stop at ETSA corner, so I hop out to have a word with the bitch, and she runs the red light almost hitting traffic coming out of the city!!!

Hag :laugh:

I've spent most of this week off sick, and got frustrated driving my other car all the time... Thought I'd rip the reo off and size up how bad the situation was.

So, removed reo, mounted the FMIC up, making sure it was high enough that the the bottom return pipe fits under the undertrays. So, assessing the reo, there's no way it can even fit no matter what I do - it hits on one of the top mounts. Sits perfect on the passenger-side, but drivers-side - not a chance - even if I moved the FMIC across as far right as I could. I'm bloody confused and exhausted :laugh:

I'm just about ready to give up - anyone have any ideas..? :/

IIRC that kit comes with the middle top bracket for both R33 and R34, are you sure you've used the correct top bracket? Have you got a pic of the top bracket mounting to the bottom of the hood striker?

IIRC that kit comes with the middle top bracket for both R33 and R34, are you sure you've used the correct top bracket? Have you got a pic of the top bracket mounting to the bottom of the hood striker?

I didn't get any brackets - ahh the joys of s/h kits. This is why I've had to try and guess about positioning and make up my own brackets :laugh: .. I think maybe it might fit if I mount it about an inch or more lower, but then I'd be worried about whether the lower piping is gonna fit. It seems like a very precise/tight fit to me.

This is turning into way more trouble than it's worth.

that jack is only 1300kg very cheap though proly cost you $100 to ship

normal cost is near 200USD, and being alloy it's lighter. even my supercheap special lifts the R34 rear end or front end with ease. so this one would be even easier since its a race jack it lifts with a few pumps.

sure these cost a pretty penny in oz in alloy ?

I shipped two huge sub woofers from usa for like 60 bucks insured. they weighed a shite load too

I didn't get any brackets - ahh the joys of s/h kits. This is why I've had to try and guess about positioning and make up my own brackets :laugh: .. I think maybe it might fit if I mount it about an inch or more lower, but then I'd be worried about whether the lower piping is gonna fit. It seems like a very precise/tight fit to me.

This is turning into way more trouble than it's worth.

is it a return flow kit?

Im with Steve, different kits with the top centre mounting bracket mount in different holes - there should be two holes available from memory - def try the lower one. if youre making the bracket yourself it'd have to be a precise length ,as of course if it's too much over/under size, the FMIC piping won't line up with the standard piping properly

is it a return flow kit?

Im with Steve, different kits with the top centre mounting bracket mount in different holes - there should be two holes available from memory - def try the lower one. if youre making the bracket yourself it'd have to be a precise length ,as of course if it's too much over/under size, the FMIC piping won't line up with the standard piping properly

Yes, it's a return-flow kit.

I don't have much choice but to make my own brackets - it's turning out to be lots of trial and error - I think I might have it - i'm persevering!

I just hoped things would go a lot smoother than this!

So, had to remove the rear leaf springs from an Isuzu Tipper today.

The guy thought it would be ok to leave his 6 tonnes of wet sand in the back.

What should have taken an hour or two including setup for stands, unbolting, removing wheels etc, turned into an 6 hour job.

God i hate people sometimes.

He called us up 10 minutes after he dropped it off. Hoping that it wouldn't matter.

He was flying out to Syndey then onto a 10 night cruise ship thing.

Old bastard he is. Too slack to buy a new indicator stalk, he uses a condom on it to make it work, also his stash of porn in the cabin is something to be scared of.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...