Jump to content
SAU Community

Recommended Posts

What Snowman said was correct.

Run 1 - Clutch slipped at the top of 2nd and in 3rd, I came off the gas to save the car. Mid 12.

Run 2 - Launch sucked big time and heard a pop at about 5500 in 3rd so I came off the gas again. Low 12.

Run 3 - Driven by Nige, stuck the launch brilliantly, awesome change to 2nd and then slippage in 3rd so he backed off. Best of 10.7@132MPH.

Last time we headed out, we managed a max of 140MPH so there is some potential in the car. Just need a clutch that can hold it. I am currently in investigations to whether I should go a quad plate or a carbon triple.

More details to come soon.



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...