Jump to content
SAU Community

Recommended Posts

Gday guys, got a heap of rb26 bits that ive been collecting, but not going ahead with this build now so its all up for sale

happy to post at buyers expense.. will supply pictures tonight or on request

parts to suit rb26 and are brand new unless stated otherwise

1- 6 boost manifold t3 flanged has turbosmart progate fitting welded on $900

2- turbosmart progate 48mm $600

3- arp head studs $380

4- denso/sard injectors 660cc (used, will supply part number soon) $500

5- power enterprise triple plate clutch (used, good condition) comes complete, flywheel disks and thrust bearing. $500

6- hks cam gears $350 purple and blue/green colour ones

7- acl multi layer head gasket $ 220

8- rb26dett throttle assemblies x3 $100

9- gtr standard injectors used $200

10- standard rb26 cams (used excellent condition) $150

11- apexi air cleaner kit, 2x aircleaners,alloy fittings $200

12- tomei/jun head , rb26 head built up in japan.. has tomei phospor guides,tomei springs and retainers, light port and polish, jun 272 10.8mm cams being shimmed now, will be ready by end of week. $2800

13- rb26dett block, decked acid dipped, bored, torque plate honed, r32 crank with extended nose, cradle and block line bored for straightness.. acl/ross 87mm forged pistons, eagle rods, acl bearings clearances checked ready to be assembled. $3900

14- n1 pump used for 1200kms $380

15- n1 water pump brand new $290.00

heaps more, this is all i could remember right now:) will update tonight.

pm or call 0403600810

cheers

Link to comment
https://www.sau.com.au/forums/topic/292553-rb26-performance-parts/
Share on other sites

5- power enterprise triple plate clutch (used, good condition) comes complete, flywheel disks and thrust bearing. $500

Push or pull? If push, will you ship to Norway?

Best regards

Petter

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
    • You don't have an R34 service manual for the body do you? Have found plenty for the engine and drivetrain but nothing else
    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
×
×
  • Create New...