Jump to content
SAU Community

Recommended Posts

Ouch man that looks painful! I would be checking your hub for cracks, and quite often a lower arm that bent will have bent the upper control arm too.

If you look around all these parts are available pretty cheap so not too bad, also if you've been considering adjustable camber arms, it could be a good time to do it :)

what the hell did you hit???

Lol a curb....should of just hit the damn cat

swaybar looks bent.. possibly castor arm as well

I was worried about those as well but I checked out the driver side rods and they seem to be the same shape...hopefully get a new LCA soon and it'll be sweet...need to get it fixed before Midnight CRUISE!!!!

hi james, vu from dt panels here

we repaired an r33 last week with similar damage to yours last week

we replaced the lower control arm and the castor rod didnt look bent but when we put everything back together the wheel was still castored back

so we replaced it with another standard item and it was fine again

probably best to replace it to avoid taking everything off again (they're only like $50-70 i think)

i doubt the swaybar is bent, the linkages allow them to flex a fair bit

remember to get a wheel alignment after everything

hi james, vu from dt panels here

we repaired an r33 last week with similar damage to yours last week

we replaced the lower control arm and the castor rod didnt look bent but when we put everything back together the wheel was still castored back

so we replaced it with another standard item and it was fine again

probably best to replace it to avoid taking everything off again (they're only like $50-70 i think)

i doubt the swaybar is bent, the linkages allow them to flex a fair bit

remember to get a wheel alignment after everything

My theory is do LCA and radius rod, then take it for alignment and if he can get a good alignment and it drives fine, and the wheel aligner gives it a check over, he should be ok!

Swaybar links didnt look like they were under too much pressure.

Thanks for all the input guys!! John's old caster rod and Control arm is now on my baby and seems to be running great again, next a trip to the shop for some new treads, balance, alignment and a brake flush and hopefully will be able to make it for the midnight cruise! Just like to thank Jack (iirc) for taking my baby home, champ of a guy and makes it that much easier knowing your baby is on the back of a truck whos driver knows what it means to own a skyline.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...