Jump to content
SAU Community

mechanic apprenticeship

druzilla32

By druzilla32,
in Queensland

 Share

Recommended Posts

druzilla32 Mentor

druzilla32

Posted
Posted

I am currently working in an admin position and have been for the last 4 months.... its getting a bit old now.

I am realy interested in getting a mechanic apprenticeship. Does anybody know where I could go for one. I know i dont know everything that i need to but thats what apprenticeships are for.

I have only done simple stuff like installing single and dual stang boost controllers on a wrx and skyline, also will be installing a fmic on the weekend. Its a start tho.

So any help would be great.

Link to comment
https://www.sau.com.au/forums/topic/29380-mechanic-apprenticeship/
Share on other sites
MJ Mentor

MJ

Posted
Posted

Dude its quite a shit industry.......the pay is shit, your employers will more then likely be assholes. I think it would be pretty hard finding a job working in a performance shop....If you do get a job in the industry it will be changing oil in falcodores at your local dodgy mechanic

Unless you find a place that is passionate about their work and will look after you then i think you are better off in your admin job.

With summer coming up i know id rather be inside in a nice air conditioned room then sweating my ass off fixing cars that idiots dont know how to look after.

I dont wanna turn you off if its what you really want to do, but i'm just letting you know the reality of how things are.

chaos Grand Master

chaos

Posted
Posted

I have to agree with MJ

after doin some work in the area gettin up at 5 every morning and not gettin home till 6 or even 7 for bout $6 an hour aint really worth it.

I tried gettin into the performance side but they want people with experience hence people who have done the 4 years.

If your still up for it, just ask around or give tafe a call and they can put you in the right direction.

unwritten law Proficient

unwritten law

Posted
Posted

I think if i worked on cars for a living i would get sick of working on them, and therefore wanna drive a shitter because i wouldnt wanna work on it.

I enjoy the weekends where i can have a bit of a tinker with the car and thats about it for me.... and the money factor too of the industry that i am in...

ohhh and Chaos - i dont like ur signature dood :looney:

rusty666 Enthusiast

rusty666

Posted
Posted

your best bet is to do the tafe course that i am doin at the moment its a six week course (pre vocational mechanics course). its sick they teach you every thing from doin an oil change to a complete rebuild and its set out in modules.I LOVE IT. im like the youngest there though. contact tafe there are workshop facilities at brisbane ashmore and mur bah.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...