Jump to content
SAU Community

Recommended Posts

Hey guys.

Currently in process of installing Nismo intank fuel pump on the 33. Working off the tute in the diy section. Everything was going to plan until i put the new pump back in the hole. I cant find the spot to actually mount the bracket inside. When i pulled the original pump out it didnt appear to have the mount part holding onto anything either. It is sitting right at the bottom of the tank part. Am i pretty safe to close it all up and leave it go? Or is there issues this could cause (maybe like fuel surge if the pump moves (even though it seems fairly steady).

Secondly. With the black ring that you have to tap around (with wood and mallet by the tutorial). A few of the tab bits are starting to dent a bit. Has anyone come across a better method to tighten the ring over the lid???

Thanks for any help.

ps if anything doesnt make sense im a bit "fuelled up" atm. :) lol.

Cheers Luke

the bracket has like 2 forks on the bit thats at rigth angles to the main bracket . these slide into 2 slots on the front wall of the tank just inside the whole .

get a blunter screw driver

ive seen pics of people using big multigrisp on the ring thing. god that gave me the shits putting it back on. too fiddly to get off centre.

also, it may take a lil while to get it on the mount. took me around 10mins of constant trying. you'll get it eventually :)

Thanks for the help guys.

Pump is in. Car is running again (cant take it out of the street to test as No interior or seatbelts atm. and i dont have a milkcrate to use as a makeshift seat :(

For peoples future reference. My ring was getting a knocked about trying to get it back on. (No funny comments there please ;) ). Ended up putting a bit of inox on the inside thread of the ring. Went on like a dream, then secured fine once tightened.

Literally took about 2 minutes to finish off.

Cheers. Luke

  • 2 weeks later...

Well. The car finally left the garage with the new pump in tonight. Running fine. Ive read the nismos are fairly quiet. This thing sort of howls. lol. Admittedly with no back seat or sound deadening. But wow. Sounded pretty tough though i must add.

Is it normal for nismo pumps to be approx double as loud as standard??

Secondly. I know i dont need a tune straight after getting the pump done. But if the car was running perfect before the pump. Am i fairly safe to be revving it right out on the new pump without affecting tune at all???

Thirdly (full of questions tonight). With a power goal of approx 250rwkw. On the Nismo pump should i be doing the wiring upgrades to make the most of it??

With a power goal of 250rwkws, you'll be fine with that pump as is, no wire upgrades.

As far as tunes go, if your tune was fine before, and you've upgraded your pump.....all i can see happenning (and that's a maybe) is you'll be getting slightly more fuel which is actually safer so rev to your hearts content.

just make sure you did secure the pump to the bracket inside the tank. otherwise you are going to get fuel surge issues and possibly damaged/dead pump eventually.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
    • Hi Jasmine. How's the war going?
×
×
  • Create New...