Jump to content
SAU Community

Rb25 Injector Seals

Shiraz200SX

By Shiraz200SX,
in Engines & Forced Induction

 Share

Recommended Posts

Shiraz200SX Collaborator

Shiraz200SX

Posted
Posted

I have a customer that bought an Autotechnica Plenum PN#PMRB25 from me, and a workshop is trying to fit it, and the injector rail when bolted in is as loose as a cock in a sock.

Does anyone know the genuine part numbers or know an aftermarket company that makes/supplies them?

Cheers,

Clinton.

Link to comment
https://www.sau.com.au/forums/topic/295018-rb25-injector-seals/
Share on other sites
discopotato03 Grand Master

discopotato03

Posted
Posted

You have two sets of O rings that seal the injector in the rails well and large washer shaped ones to seal the rail to the manifild itself .

Genuine Nissan for S2 R33 GTS25T .

"O-RING HOU LWR" - 16618 - 53J00

"O-RING HOU UPR" - 16618 - 10V05

"INSULR F/INJ.LWR" - 16636-72P00

Also insulators that fit under the screwed down steel caps .

"INSUL F/I UPR - 16635 - 53J00

These came through John Robinson Nissan Rockdale in Sydney .

I believe these are correct but check before you buy , Cheers Adrian .

Buraz Proficient

Buraz

Posted
Posted

Injector seals from Nissan are very expensive, I called up recently for a set for my GTR and they were very expensive. I found them from EFI Hardware for something like $2 each and they have anything you need injector related. Just to let you know if you want to save some money.

www.efihardware.com

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...