Jump to content
SAU Community

Recommended Posts

Hey all,

Sold some of the parts off my ceffy but more still need to go! The whole car is also for sale with heaps of stuff still on it for a bargain price. Much cheaper for the mods than others at the moment!! (see bottom of the thread)

********************

Trust 10 Row oil cooler (Painted black for stealth) - With braided lines and

sandwich plate / thermostat = $500

Trust1.JPG

Trust2.JPG

Defi Din gauges - Almost brand new, used for about 3 months (Oil Temp, Pressure,

Water Temp), comes will all sensors (oil pressure never used) wires etc = $550

Pics:

Din2.JPG

Work Emotion Kai 17 x 9 +17 all round - Slight gutter rash on a couple of the

rims but hardly noticable on the car - Falken 452's on the front and BRAND NEW cheapies on the rear = $1800 with tires,

$1620 without

Pics:

wheel1.JPG

wheel2.JPG

wheel3.JPG

wheel4.JPG

********************

Nissan Cefiro

= $10,000 WITH the above parts and below mods

= $9,500 WITH the above parts, stock turbo not fitted and below mods

= $8,500 WITHOUT the above parts and with below mods

I have created 3 pricing levels for people to choose how they want the car. I will drop $500 off the price if someone wants

to take it without me having to fit the stock turbo and manifold because I am short on time.

The car has rego until Feb and still has an extensive list of mods. Would make a perfect streeter.

Here are the details, please contact me for more information on the car:

EXTERIOR:

CA31 Chassis - July 1989 Build

Manual conversion

M-Sports 30mm Flared & Vented Front Fenders - Genuine

Rear Guards Flared by 20mm

Full Respray in factory Diamond Black

Factory Sunroof

Late Model Tail Lights

Kaixon 6000k HID Headlight Kit

Legal Tint with Front Banner

ENGINE:

RB20DET

Stock turbo

Xtreme Chrome Moly 5.5kg Flywheel

Xtreme 9 Puck 25% Over Standard Clutch

SplitFire Coil Pack Kit

R32 GTR Coilpack Loom

No exhaust currently fitted.

East Bear GTR Cooler Kit & Piping

Custom Stainless Intake Cross Pipe (By C-red Tuning)

R33 GTR VSpec Intercooler (painted black)

Trust 10 Row Oil Cooler w/ Braided Lines & Spin on Adaptor (painted black)

Bosch O40 Fuel Pump with Source Power direct from Battery

New rocker cover gasket (2000ks old)

Nissan Steel Exhaust Header Gasket w/ new Nissan Studs and Brass Nuts

Quality Blue Silicon Used on all joins and bends

Silicon Vacuum Hoses

Silicon Radiator Hoses

Razor Grounding Kit

Oil Catch Can

Retuned Standard ECU - Socketed ROM (in Japan)

DRIVETRAIN:

2-Way Mechanical Diff (Nice and quiet)

Gearbox Had 6 Bearings Replaced (Synchros are crunchy which 'may' be caused by slave cylinders not opening fully)

R32 Half Shafts installed

HPI Braided Clutch Line

Brand New Speedo Cable

UNDERNEATH:

Tein HA Coilovers (Purchased brand new in 04, 35,000km old now with no leaks or clunks)

Tein Castor Rods

Castor Rod Mount Brace

Cusco Front Strut Brace

Adjustable Traction Rods in Rear

Adjustable Upper Arms in Rear

HICAS Lock Back

Drift Pineapples on Rear Cradle

Work Emotion Kai 17 x 9 +17 all round

Brand new Falken 452 on the front and brand new tires on rear (215's all round)

Full 5 Stud Conversion, R32 Rear & Custom Billet Front Hubs

New rotors and pads all round (2000 ks old)

20mm 5 Stud Bolt on Hub Centric Spacers on Front

Z32 4 Pot Brakes & R32 2 Pot Rears in Red (replaced Rear Brake Lines)

S14 Steering Rack & Custom Power Steering Lines

INTERIOR:

Sexual dash mat (extremely rare!)

HKS EVC3 Boost Controller

Greddy Boost Guage

Nardi Turino Steering Wheel

Standard drivers seat

Stock S13 (Passenger)

Razo Gearknob

Pioneer MP3 Head Unit

Pioneer 6" Splits

PICS:

IMG_0096.JPG

IMG_0098.JPG

IMG_0099.JPG

garage.JPG

Parts and car are located in Diamond Creek (NE Melb suburbs).

Contact me on 0412 033 449.

Thanks.

Edited by konect

hey mate not trying to be rude in the first photo of ur rims is that gutter rash that covers nearly half the edge of the rim? how much would it cost to post to bris? and theres a substantial amount of gutter rash on all four rims would u go any lower on the price with no tyres?

thanks

hey mate not trying to be rude in the first photo of ur rims is that gutter rash that covers nearly half the edge of the rim? how much would it cost to post to bris? and theres a substantial amount of gutter rash on all four rims would u go any lower on the price with no tyres?

thanks

That's cool. Yeh there is a fair bit of rash on them.

Wont go any lower on the price or I might as well keep them. The rims themselves are perfect otherwise...just belonged to someone that couldn't drive :banana:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...