Jump to content
SAU Community

Newbie Needs Help!

micksrb25

By micksrb25,
in Australian Capital Territory

 Share

Recommended Posts

micksrb25 Apprentice

micksrb25

Posted
Posted

Hey guys my name is Michael and i bought a 1996 R33 GTS-T yesterday and love the car. My only problem is i need new rear shocks for rego and the cheapest i have found are $700 a pair but i have already blown my budget on the car. So can anyone reccomend where i can get some fairly quick and cheaper then that?

My other question was what oil should i be using the engine is stock at the moment and where can i find air,fuel and oil filters for the car? I went down to Super Cheap but the car is not listed for these parts anywhere.

Any help or advise would be appreciated cheers Michael

Link to comment
https://www.sau.com.au/forums/topic/295842-newbie-needs-help/
Share on other sites
hr32gts Rising Star

hr32gts

Posted
Posted

Hey mate another Michael ,

If you need a service done let me know and I can do one for you ...

I charge $90 per hour + parts

oil filter part number off the top of my head is Z145A

And I am pretty sure that I can get rear shocks cheaper than $700 for a pair

what brand were you quoted 700 for ?

Frink Veteran

Frink

Posted
Posted

Welcome mate,

Nearly everyone will recommend Motul 4100 Turbolight oil for your motor and it can be found at Repco and Autobahn. Most places wont have a parts list for our cars, but if you can find the part numbers then they'll most likely have them or be able to get them in for you. try using the SEARCH TOPIC in various threads if your looking for this information as it had been talked about so many millions of times that it should be easy to find. servicing your skyline is so simple that a baby could do it blind folded! if you need some help just ask and most of the guys on here will be happy to help guide you through it. as for the shocks, $700 a pair is a little steep. there are only 2 places in canberra to go to for suspension and that is Inline in Qbn or Capital Steering and Suspension in Fysh. i think i got quoted about $600 a pair for Bilstein's about 4 or 5 years ago....

hope this helps...

GODZ1LLA Proficient

GODZ1LLA

Posted
Posted

Welcome to the forum Michael

Thats way to expensive for shocks lol you should be paying a round 500 ish give or take alittle..

As for serviceing yeah do it yourself and learn about the car just dont do what i did and thats when you flush the rad (if you do flush the rad) dont for what ever reason undo the nut on right hand siode of rad to drain just take the hose out!!

Otherwise you will be like me needing a new rad as they dont like to go back into the plastic once took out!!

Oil use Motul 4100 :)

TiTAN Grand Master

TiTAN

Posted
Posted (edited)
when you flush the rad (if you do flush the rad) dont for what ever reason undo the nut on right hand siode of rad to drain just take the hose out!!

Otherwise you will be like me needing a new rad as they dont like to go back into the plastic once took out!!

Oil use Motul 4100 :)

i never had that problem and mine came out and went in a few times.

Yeah either Motul 4100 or 8100

v300

Edited by TiTAN
GODZ1LLA Proficient

GODZ1LLA

Posted
Posted (edited)

Mine wouldnt go back in :)

Got a 2nd hand rad that went in a few times but was leaking then it decided to not go back in after a few trys :D

Ended up going aftermarket alloy rad :)

Edited by GODZ1LLA
JD_R33 Proficient

JD_R33

Posted
Posted (edited)

If you don't necessarily want brand new, I have a full set of used stock springs and shocks off a 96 R33 S2 that should get you through rego.

Since you're new here, and had good enough taste to buy a Skyline, you can have them cheap :) .

Oh, and you'll find the filters listed in the Ryco catalogue, but the imports are normally in a different section to the domestic models.

Or try www.rycofilters.com.au.

From memory - oil is Z145A, air is A360.

Fuel filter could be one of about three different models, best to take the old one in with you and just compare it.

Edited by JD_R33
nerm Mentor

nerm

Posted
Posted
Hey guys my name is Michael and i bought a 1996 R33 GTS-T yesterday and love the car. My only problem is i need new rear shocks for rego and the cheapest i have found are $700 a pair but i have already blown my budget on the car. So can anyone reccomend where i can get some fairly quick and cheaper then that?

My other question was what oil should i be using the engine is stock at the moment and where can i find air,fuel and oil filters for the car? I went down to Super Cheap but the car is not listed for these parts anywhere.

Any help or advise would be appreciated cheers Michael

theres you problem... ooooooooooooooo!!!!!!!!!!! oh no he didnt

micksrb25 Apprentice

micksrb25

Posted
  • Author
Posted (edited)

Thanks for the help and advise guys, i just freaked out a bit when i couldnt seem to source any parts. As for the servicing i should be able to do basic stuff myself iv always serviced my own cars but thanks anyway.

Hope to meet up with you guys in the coming months if i get a chance but iv just started a new job and have to work a lot of weekends

Cheers

Edited by micksrb25
micksrb25 Apprentice

micksrb25

Posted
  • Author
Posted
If you don't necessarily want brand new, I have a full set of used stock springs and shocks off a 96 R33 S2 that should get you through rego.

Since you're new here, and had good enough taste to buy a Skyline, you can have them cheap :) .

Oh, and you'll find the filters listed in the Ryco catalogue, but the imports are normally in a different section to the domestic models.

Or try www.rycofilters.com.au.

From memory - oil is Z145A, air is A360.

Fuel filter could be one of about three different models, best to take the old one in with you and just compare it.

Hey mate definetely interested in those shocks it would help me out o lot. Are they off a GTS-T or a GTR because i thought there was a difference??

Also i cant PM yet so if you PM me your number i will give you a call and come and pick them up how much yo want for them??

putraged Rising Star

putraged

Posted
Posted
i got stock rear R34 25GT if its the same one as yours. i need someone to clarify this.

u can just borrow it from me and return it after u pass ur rego.

nb: im not a mechanic, but i changed my springs with coilover by myself. sooo, pretty much i can help you with the main idea.

cheers

  • 2 weeks later...
micksrb25 Apprentice

micksrb25

Posted
  • Author
Posted

Well i put the new shocks in (thanks JD R33) and got new rear tyres, had rego check this morning and failed on front tyres which i thought were fine but inside edge was stuffed (just), after market peddles now i gotta try and find some original rubber things for the originals and it appears someone did a dodgy fix up job on one of the pipes on the exhaust so will prob need a new bit of pipe there. Damn car is costing more money then expected at a bad time of year. Anyone know where i could get the rubber things for the peddles cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • MBS206
      Starter motor replacment teeth count.

      By MBS206 · Posted

      I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...