Jump to content
SAU Community

Advise Needed Please - What Do I Go For?

CMY32

By CMY32,
in Victoria

 Share

Recommended Posts

CMY32 Enthusiast

CMY32

Posted
  • Author
Posted
Adam, R33 are not compatible with NisTune without going to a Z32 ECU... R34 and R32 are.

Nistune fitted and Tuned at Status is 750 going by what Trent said in a thread, best to call him and confirm, as prices could of changed.

Second hand SAFC 2 is what? 250, + wiring + tuning assuming 500ish for install and tune, then it is easily defected, where a NisTune isn't... Things starting to look a little different now?

SAFC: bends AFR's on a few points.

NisTune: AFR's, timing, limits etc can all be adjusted.

damn..... bloody auto

CMY32 Enthusiast

CMY32

Posted
  • Author
Posted
NisTune should be fine with an Auto as it is a modified standard ECU.

i should finish reading b4 i post my reply lol

ill give it a go, if others are having some luck.....

dezz Grand Master

dezz

Posted
Posted
Yay ok i guess i'll give the nistune a go....

Dez - yes it's finally up and running - could've beat ya hehehe

Still got the Ford beast, I'll run you in that.

Might even put it on display at the show n shine..

SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted
Beware that when you start considering something like nistune or power fc, tuning is expensive ~$600+

not really... all depends on how many hours the tuner spends - my Nistune remap by Trent @ Status was $750 all up i'm pretty sure. That's all the soldering, installation, tune, etc. Then i think it's about $80/hr for tuning when you come back with "upgrades" :P not 100% sure..

i would HIGHLY, HIGHLY recommend Trent @ Status Tuning. Nistune or whatever other option you go for. But especially Nistune

CMY32 Enthusiast

CMY32

Posted
  • Author
Posted
not really... all depends on how many hours the tuner spends - my Nistune remap by Trent @ Status was $750 all up i'm pretty sure. That's all the soldering, installation, tune, etc. Then i think it's about $80/hr for tuning when you come back with "upgrades" ;) not 100% sure..

i would HIGHLY, HIGHLY recommend Trent @ Status Tuning. Nistune or whatever other option you go for. But especially Nistune

Is Dr. Drift any good?

lukebaldan Collaborator

lukebaldan

Posted
Posted
not really... all depends on how many hours the tuner spends - my Nistune remap by Trent @ Status was $750 all up i'm pretty sure. That's all the soldering, installation, tune, etc. Then i think it's about $80/hr for tuning when you come back with "upgrades" ;) not 100% sure..

i would HIGHLY, HIGHLY recommend Trent @ Status Tuning. Nistune or whatever other option you go for. But especially Nistune

That's awesome! $750 is a steal for everything + initial tune.

Wyseman Community Regular

Wyseman

Posted
Posted
Is Dr. Drift any good?

He's tuning my car (nistune) on the 27th so i'll let you know. Some friends I have speak very highly of the tunes he's done on their cars.

Best thing about the nistune is that you can load a standard map into it and it will just run as per the factory computer. I got the ECU done months ago (sent mine to Nistune in SA and they returned it within a few days with the chip fitted and the standard ECU map loaded.. Chip cost $220, fitting cost about $60 plus postage). I've been driving with the standard maps for months now, there's no need to get a tune done until you're ready.

Now in the future if I change AFM's or turbos, my ECU will handle it just fine.

CMY32 Enthusiast

CMY32

Posted
  • Author
Posted
He's tuning my car (nistune) on the 27th so i'll let you know. Some friends I have speak very highly of the tunes he's done on their cars.

Best thing about the nistune is that you can load a standard map into it and it will just run as per the factory computer. I got the ECU done months ago (sent mine to Nistune in SA and they returned it within a few days with the chip fitted and the standard ECU map loaded.. Chip cost $220, fitting cost about $60 plus postage). I've been driving with the standard maps for months now, there's no need to get a tune done until you're ready.

Now in the future if I change AFM's or turbos, my ECU will handle it just fine.

Let me know how it goes.........

Sarumatix Veteran

Sarumatix

Posted
Posted

+1 nistune I also have a gts-4 (although manual) with a 26 and trent had no problems tuning my car. Advise is to call around though as I believe a lot of workshops are quite booked out atm!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Borg Warner EFR Series Turbo's V 2.0

      By GTSBoy · Posted

      You'd want to cap off the re-entry back into the dump too. Just something flat that can be held on by the Vband.
    • Keeper
      SAUNSW - GTR Festival 2025 - Saturday 24th May

      By Keeper · Posted

      Thanks for the recap Matt Z. It was a great day out and I know you have said it already, but we couldn’t have done it without the volunteers.
    • KJC
      SAUNSW - GTR Festival 2025 - Saturday 24th May

      By KJC · Posted

      Couldn't agree anymore, massive thanks to all that came by, helped out, or those who just wanted to talk cars. You are the community that make this such a great car club. cant wait for what we have planned for the future
    • Dose Pipe Sutututu
      Borg Warner EFR Series Turbo's V 2.0

      By Dose Pipe Sutututu · Posted

      Looking at the photos, you could easily just drop this pipe and dump into atmosphere  Just 1 or 2 quick hits for data acquisition - if have a heat shield material and/or sheet metal, maybe just use wire/metal cable ties and attach it in a way to deflect heat from melting nearby wires.  
    • Matt Z
      SAUNSW - GTR Festival 2025 - Saturday 24th May

      By Matt Z · Posted

      2025 PRP GTR Festival - A Massive Thank You from SAU NSW! On behalf of SAU NSW, I want to extend a huge thank you to our incredible committee for all the hard work and dedication behind the scenes. You are the engine that keeps this club running smoothly! (hopefully an RB lol😆) To all our amazing volunteers who helped make the GTR Festival Sydney such a success, thank you for giving your time, energy and sacrificing your weekend sleep-ins. Your efforts did not go unnoticed and were absolutely appreciated by everyone. We also want to give a big shoutout to the workshops, trade stalls, and the awesome VIP's we connected with over the weekend. Your support means the world to us, and we’re so proud to be part of such a passionate automotive scene. We are looking forward to collaborating with you at our future events.  SAU NSW had our marquee up for two full days at GTR Festival, packed with merchandise, a sizzling members BBQ, and a chance to chat with the committee, sign up, and check out some hot Skylines on display from our members. It was incredible seeing so many smiles and genuine conversations, that's what we're all about! SAU NSW is more than just a car club... we’re building a community where you can make friends, share stories, and talk about anything RB related or not. 📸 Please post any cool pics you took at the GTR Festival in this thread! 📸 To our current members, thank you for your ongoing loyalty, and to all our new members... welcome to the family! We’re beyond excited to have you on board! Please ensure you are involved as much as possible within the club, and make the most of our exciting upcoming events. Here’s to more future events, thrilling drives, chill meets and good feeds! Let’s keep building something special. 💪🚗💨 Matt Zoumpoulis, President SAU NSW
×
×
  • Create New...