Jump to content
SAU Community

Dirtiest Rims Ever - How To Clean Them?

_Wing_

By _Wing_,
in Exterior & Interior Styling

 Share

Recommended Posts

_Wing_ Proficient

_Wing_

Posted
Posted

I decided to give my wheels a clean but i wasn't all that successful, attached is a before and after shot... now as you can see the brake dust has made a permanent home in the corner there (one of many corners actually) and so I'm looking for suggestions on ways to clean it, anything other than painting over it :)

Let this be a lesson for the lazy lol

post-12866-1258549238_thumb.jpg

post-12866-1258549244_thumb.jpg

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

degreaser and a microfibre towel, if that fails you could also employ a toothbrush.

i've done my rb25 and 4age motors this way and the 4a had never been cleaned

NZM.031 Grand Master

NZM.031

Posted
Posted

1. buy some alu-brite or aluminium acid..

2. hose wheels

3. spray it on with a squirty bottle

4. give it a bit of a scrub with a softish brush

5. hose off

6. pick your jaw up off the ground in amazement

ive done this on naked rims and painted rims, ive done it to some 20 year old volks that had never been cleaned, and they looked like new... and aslong as you get full coverage and dont let it dry (keep the wheel wet at all times) its safe as witches hats.. washing up gloves are recomended.. sunnys or glasses wouldnt go astray.. and try not to breathe it in too much.

cheers

Linton

_Wing_ Proficient

_Wing_

Posted
  • Author
Posted

tried degreaser, it didn't do anything lol and it's going to be difficult to rub and scrub cut and polish in the corner there :)

this stuff is baked on hard! i tried to scratch it and you can see my attempts in the middle of the baked on crap.

thanks for the other suggestions i'll give them a try and see how it goes ;)

_Wing_ Proficient

_Wing_

Posted
  • Author
Posted

I ended up giving jif a go today and it works (thanks to Dale you know who you are)! And as somebody else said would happen, I soon grew tired of scrubbing and scrubbing and decided to just live with it lol

I'll end up sand blasting and powder coating them anyways so it'll be perfect then :bunny:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...