Jump to content
SAU Community

Recommended Posts

Door Pack is sh*t..really!

Buy the Bulk pack.I did..glad I did.

I think it's actually called the Trunk Pack or something like that.

But yeh, bout half the pack on each side should get the doors nice and stiff to absorb the bass and will give you clean notes.

I don even need a Sub anymore. Got 6x9's in the back aswell!

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4946199
Share on other sites

the skyline doors really sound sooooo much better with lots of sound deadener. like a new car when you close it.

my GTT has innner, outter, and sound mats behind the speakers. and the door panels now have foam filled handles and other sound deadener to stop the squeak between the lower and upper parts when your hip leans on them... annoying !!! plus my door pockets are going to be gone this week and filled up with another pair of splits...

the little packs that dynomat give you isnt nearly enough to do a small door properly, as chris suggested above.

there are a multitude of products that do the job, some better some worse..some you find at Bunnings for next to nothing hint hint

and for all those people who think its too heavy for a street car,clean out your macca's wrappers.... I'd rather my car sound solid built then a rattle can . you can only drive so fast on the roads anyhow? if I wanted a race car I wouldnt put a radio in it...end rant ...lol

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4946942
Share on other sites

personal preference my friend. i usually put some on the inner skin, then line behind the speaker with plain chant, then seal the door up totally, then put a sheet of dynaliner across the whole exoskeleton of the door. www.dynamat.com has some good tutorials on it.

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4949215
Share on other sites

dont overlook some of these videos

http://www.secondskinaudio.com/installation-instructions.php

Dynomat isnt the only company who does this

Stinger is another good one

my car doors are damn near sealed , my two sets of split speakers dont even fire into the door chamber they have separate chambers sealed with carbon fibre and fiber glass molds and custom horns for the tweeters molding into the door panel shell. the sound deadener is for the rattles and to keep the SPL inside the car

(photos will be posted up on Audiocontrols website soon for all to see the build up)

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4950799
Share on other sites

keen to see some horns in a car! don't see too many horns being used in australian car audio.

all to be revealed very soon...lol

Sponsors website when revealed

http://www.sound-better.net/gallery/Show-Offs/Show-Offs.html

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4956927
Share on other sites

  • 2 weeks later...
keen to see some horns in a car! don't see too many horns being used in australian car audio.

they do seem 2 be more populay in the US than Aus, proably cause they are more dificult to install

I've never installed them bet have listened to a few that just sound majic. ( & some that sound poo)

as always the more effert put in the greater the reward

Horn in the door ..... NEVER seen that.. wish I lived in hoonsville 2 have a listen

Edited by BundyBear
Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4973299
Share on other sites

they do seem 2 be more populay in the US than Aus, proably cause they are more dificult to install

I've never installed them bet have listened to a few that just sound majic. ( & some that sound poo)

as always the more effert put in the greater the reward

Horn in the door ..... NEVER seen that.. wish I lived in hoonsville 2 have a listen

Horns cost a fortune for "image Dynamics" or similar, and take a proper designed system to make them sound good, plus a lot more space to mount

there not store brand horns,,,, there very custom hand made ones and yes designed properly up too the point I could , using the space and car audio speakers instead of Pro Audio sound gear for concerts...lol

once the system is tuned I can post the RTA curve if anyone wants or ?

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4974374
Share on other sites

Horns cost a fortune for "image Dynamics" or similar, and take a proper designed system to make them sound good, plus a lot more space to mount

there not store brand horns,,,, there very custom hand made ones and yes designed properly up too the point I could , using the space and car audio speakers instead of Pro Audio sound gear for concerts...lol

once the system is tuned I can post the RTA curve if anyone wants or ?

yea 4got bout the $$$, seem to remember reading a Mag article years ago( b4 the intaweb thingy) about a system with hand made horns (posibley one or the Ausie car audio mags)

damd things always fasin8td me but could never convince anyone 2 let me try'm in their car ( can't blame em really)

P.S. ya probably guest but yep im an X Backyarder, by X I mean I only do MY cars these days ( I like 2 play by my one rules sometimes)

cheers

Link to comment
https://www.sau.com.au/forums/topic/296928-dynamats/#findComment-4975034
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
    • I can donate $100 to your upgrade fund. So long as you can donate the IC7 my way....
    • I'd love a Haltech ECU, and Haltech 10 dash. Was having a chat with Rob and Andy @ Haltech when Rob put one in his MR2. First one I'm kind of interested in too, as you can dim it RIGHT down. Andy was saying bright dashes is one of his peeves too!
×
×
  • Create New...