Jump to content
SAU Community

Recommended Posts

Originally posted by [ABU53]

dude, most workshops etc do them.

i have a mate who can make them oh, and also, i know that ARES SPEED in brissy can do basically any design/brand

ssshh .. dont tell boxhead! he will want in on the rice too :) it will go well with his high powered nismo window sticker :D

Link to comment
https://www.sau.com.au/forums/topic/2975-car-stickers/#findComment-51785
Share on other sites

Chucky

I can do the sticker for you at a good price in whatever vinyl you want just let me know the brands....

$8 each for normal size ones

HKS

APEXi

BLITZ

TEIN

BOMEX

PUNCHED OUT CAT (DRIFT CAT)

CUSCO

FALKEN

OS Giken

C's

EBC Green stuff

GReddy

GAB

Central Circuit

"Street Racer" in Japanese

Link to comment
https://www.sau.com.au/forums/topic/2975-car-stickers/#findComment-51926
Share on other sites

All depends on the vinyl and how you remove them. You should never use chrome or brushed alloy-look vinyl if you want to save your paint due to the amount of heat transfer....normal plastic vinyl is fine so long as you wash the car regualy.

When removing them leave the car out in the sun for a while so the vinyl softens up a bit then remove. I have never had a problem....also depends on the condition of the paint.

Link to comment
https://www.sau.com.au/forums/topic/2975-car-stickers/#findComment-52098
Share on other sites

Sorry Cam, didn't mean to try to outsmart u there. I read 'in HPI' a little blurb explaining that the so called punched out cat was actually the URAS monkey. After some research, I found that it isn't true and that HPI screw up more often than not. (see link for proof)

Sticker looks good though....not too big.

"Can I have one"

"No"

"Can ....Lenny have one"?

oh yeah, I'll buy one btw

Link to comment
https://www.sau.com.au/forums/topic/2975-car-stickers/#findComment-52820
Share on other sites

Actually, here is some contradicting evidence.....i been doing more research and have been finding more info that suggests the 'punched out cat' is the URAS monkey!

eg: http://www.uras.co.jp/2001tokyo.htm

http://www.uras.co.jp/goods.html

anyone who can help me out with this one??? Cam???

Its really bugging me now

Link to comment
https://www.sau.com.au/forums/topic/2975-car-stickers/#findComment-52828
Share on other sites

From what I understand the PO Cat was originally drawn on cars by drifters after an accident....most likely, Uras actually took the PO Cat and stylised it as there logo due to the amount of drift cars they build. The question is simple, do you want the PO Cat like I posted? If so just tell me how high you want him and on what vinyl and I will make it.

private email me to discuss payment etc.

Link to comment
https://www.sau.com.au/forums/topic/2975-car-stickers/#findComment-52859
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...