Jump to content
SAU Community

Recommended Posts

  • Replies 101
  • Created
  • Last Reply

Top Posters In This Topic

i've had my car 2 months and racked up 6000k's already, its a decent trip to work everyday and going to bunbury almost every weekend gets the odometre going good aswell, in saying that its never failed me :P

i've had my car 2 months and racked up 6000k's already, its a decent trip to work everyday and going to bunbury almost every weekend gets the odometre going good aswell, in saying that its never failed me :)

Sounds like a hectik fuel bill to me lol

at least your enjoying it :nyaanyaa:

Ive driven Ten Four's old 33 GTR, and ecentrix and Stormtrooper's 32 GTR's. All amazing cars. The 32's were more fun to drive i must admit, the 33 was an awesome car but way too big, felt like a boat.

If someone wants to let me drive their 34 GTR then i can compare all of them =] But i may stain your seats... :)

Well I found my car, have the finance going through final stages, and by the end of next week will be rolling in style, with heavily tinted windows :)

Oh btw she's a R33 Gtr in silver, the one on carsales :D

Martin, if you think R33 GTR is boat, drive my dads ooold bentley.

BTW, isnt the phrase, "Bigger is better"

Congrats to the OP!

Not always, 2.6L TT smaller but better than 6L V8 :D

I know it wouldn't be the worst car around, my mates Falcon is worse by far, but it just felt big. Was a good car though, shame you got rid of it. How is the new beamer doin for ya?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...