Jump to content
SAU Community

Recommended Posts

Hey guys,

I know you probably get this alot, but here goes...

My dream car is an r34 Skyline Coupe, and from what I've heard, whatever the FOB price is, you basically double that, and after a few headaches or two the car is registered in AUS. What are you experiences?

So lets say i have $12,000 to spend on a coupe. Is it worth it?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/297732-importing-into-vic/
Share on other sites

Doubling the price is a little bit simplistic but in the case of a $12,000 car is probably about right, a very rough rundown of the costs involved for a $12,000 landed and complied R34 would be:

Purchase pice of the car: 480,000 yen FOB / $5,900

Service fee of a broker if using one: $1,000

Shipping, customs and wharf costs: $1,900

Import duty: $300

GST: $700

Compliance: $2,200

Total: around $12,000 landed and complied, plux new tyres and registration.

For that sort of money you could probably only afford a non turbo coupe in good condition, a turbo would probably be out of your budget.

Hi Curley i wouldnt say you just double the FOB fee there is a few calculations you need to do to work out the landed and complied price

when you say you have $12,000 does this mean complied and landed or landed only?

example

car cost 500,000fob = @ 81 exchange rate $6172.00 AUD add shipping say 1200AUD + duty 10% + Gst 10% + customs and quarentine say allow upto $500 if its reinspected and needs a clean + customs agent fee $150 + transport to compliance $150 + $2500 complaince + tyres + registration costs. also allow a bit extra for things extra transport or repairs for the car at compliance or the change of non standard parts etc.

total landed complied in a rough example in this case would owe you landed and complied say approx $12,571.00 + registration costs.

in my opinion 500,000yen FOB does not buy a nice example ER34 5SPD turbo coupe, it may buy a 5spd non-turbo or an Auto turbo coupe.

hope this helps

regards, Phil

Wow we must have both been typing at the same time we replied you just beat me :) BTW J-spec is Australia's #1 Broker service company, Ben will definatly look after you.

great minds think alike and our replies are very similar ... LOL

regards, phil

Thanks for you help guys,

As I've mentioned before, the r34 Coupe is a car I would love to own. I read these forums everyday, but I just don't post that much.

I'll be a P-Plater here in Vic, so turbo won't be an option anyway! I could buy something else, but i know I'll just end up kicking myself later.

I think I'll end up importing a car, it's just the risks I'm worried about...

Thanks again,

Jimbo

I was thinking along the lines of these...

http://www.tradecarview.com/used_car/japan...kyline/1084764/

http://www.tradecarview.com/used_car/japan...skyline/903141/

http://www.tradecarview.com/used_car/japan...ne+coupe/86580/

Most of these cars look pretty stock, and realistically, my budget is 12k, that is 12k to do everything except insurance. Am I dreaming? or is this achievable?

Cheers

The first and last car of those links are 2.0L models which is why they are so cheap, they are not eligile for import, you can only bring in 2.5L models. The bayside blue car if a good vehicle is VERY good value, you'll usually pay a premium for series 2 and a big premium for that colour, so I would normally expect a car like that to be quite expensive. I would recommend staying away from Trade Carview, 9 times out of 10 the cars are of poor quality, the sellers don't even own them and can't send more pics or info, or other problems. If you're after a cheap car I'd recommend sourcing one from auction as that's where prices will tend to be the best.

$12k for a manual coupe including rego and everything I think is going to be a bit tough, you can do it but the quality of cars might be a bit low at that budget. For a iptronic auto I'd say absolutely no problem.

Also the last thing you want to happen is a car to arrive in Australia that has failed Raws compliance so really you need at least a propper Auction grading sheet to determine if it is accident or not. Trade car view sellers cannot inform you this unless the car has a recent legitamite Auction sheet. although we do advertise on Trade car View ourselves thru another company there are some legitmate companys selling there which i can say, but there seems to be a lot of what we call Fishing cars there cars that are listed at cheep prices to attract attention to companies that will sometimes reply and try to get you to buy other stock saying that the original car has sold allready. try to stay away from sellers that only list 2 auction photos and find a japanese company that can physically inspect the car for damage and condition, preferably an Australian that knows how the raws system works. photos alone sometimes dont describe a car very well if they are in low resolution pix. ;)

Option 2 , like ben said buy direct at Auction where the cars are always real and have legitamate Auction sheets.

Whats ur input Kristian ? i know ur reading.... ;)

Okay, so if I were to Import a car, weather it be through a broker or just trying to do it myself, I can only import the 2.5L cars.

Tradecarview.com has always seemed a bit funny, but then again they have at least 100,000 cars on that website. Where do you advise I look then?

I would want the car to preferably be manual, Skylines? Auto Transmission? I wonder what Nissan were thinking....

I think this might be achievable, even if the car has done 140,000Km's+

Thanks again

i recomend buying from Auction thru a broker or source in japan that has reputable info. this way you can order a vehicle on the description colour and choice of options and you can be given a very close cost to landing and complied totals.

most decent brokers or exporters can supply you with good quality cars and loads of photos for you to make a good educated buy. unfortunatly buying thru auction you need to trust the exporters experiance and judgement for the right car.

Auctions have over 80,000 car per week go thru but people in Japan cannot be at every single auction in Japan for example we are in Osaka region where there is a lot of Auctions daily for us to go to but sometimes the stock is not presant at auctions we attend daily.

there are some people who will have access to the Auctions web sites and send you the basic information every night prior to Auctions for your consideration also.

cheers Phil

Also the last thing you want to happen is a car to arrive in Australia that has failed Raws compliance so really you need at least a propper Auction grading sheet to determine if it is accident or not. Trade car view sellers cannot inform you this unless the car has a recent legitamite Auction sheet. although we do advertise on Trade car View ourselves thru another company there are some legitmate companys selling there which i can say, but there seems to be a lot of what we call Fishing cars there cars that are listed at cheep prices to attract attention to companies that will sometimes reply and try to get you to buy other stock saying that the original car has sold allready. try to stay away from sellers that only list 2 auction photos and find a japanese company that can physically inspect the car for damage and condition, preferably an Australian that knows how the raws system works. photos alone sometimes dont describe a car very well if they are in low resolution pix. ;)

Option 2 , like ben said buy direct at Auction where the cars are always real and have legitamate Auction sheets.

Whats ur input Kristian ? i know ur reading.... ;)

I wasn't actually, but I am now :)

You're correct though, there are stacks of companies on Tradecarview that will list cars coming up at auction as their own stock, at a price they think they'll sell at, then they'll try and get someone to "buy" the car at that money, then they'll go and have a crack at the car at auction. If they don't buy it, they tell the customer that the car was already sold and that they'll keep the money there to try and find something else for them, dodgy buggers.

Apart from one particular company, I trust most sellers on Tradecarview as far as I can throw them.

I wasn't actually, but I am now ;)

You're correct though, there are stacks of companies on Tradecarview that will list cars coming up at auction as their own stock, at a price they think they'll sell at, then they'll try and get someone to "buy" the car at that money, then they'll go and have a crack at the car at auction. If they don't buy it, they tell the customer that the car was already sold and that they'll keep the money there to try and find something else for them, dodgy buggers.

Apart from one particular company, I trust most sellers on Tradecarview as far as I can throw them.

So do you think it's a good idea to try and import myself?

Either way I like the idea of having a broker ;)

From you experience, and todays prices from Japan, do you think what I'm after is achievable PRIMO, Blipman & Iron Chef Imports?

Thanks for you help

for non turbo 5spd its possible but they are getting hard to find. if you had slightly better budget i would say would get you better car also less than 80,000klm.

cheers, Phil

Thanks.

Yeah, 12k would really be my max, but hey, it's worth a shot I guess! ;)

It's still a good 6 months off, so I'll be in contact with one of you guys in 6 months time! glad the Import duty is going from 10% to 5%...

Cheers

its not importing that will cost you its the complience. i dought you will be able to get a fresh na 34 for 12k. and you have to watch out most complience places are fair dodgy.

but its worth giving dom a call at holford moters. his costly but his honest.

cheers panda

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...