Jump to content
SAU Community

Recommended Posts

i never get to drive the stagea like it should as i have a missus stapled to the passenger seat 99% of the time.

yesterday she had a lift home with a friend so i wound down the windows and have it a couple of full throttle runs .

it works fine and goes like a rocket after the new exhaust has been put on a month ago (3 inch front pipe, the highest flowing cat i could find and a fujitsubo cat back 3 inch)

but i noticed everytime at 5500 to 6000 it hesitates for a second then keeps on going to redline where the auto shifts, the exhaust makes the nicest craclke and pop sound while engaging second and continues strong in the next gear.

only noticed it recently and if it is on 50-80% throttle it wont do it - only at near or full throtle.

drives beautifully none the less, just curious to the cause

the exhaust stuffed things up?

sign of something on the way out?

Link to comment
https://www.sau.com.au/forums/topic/297804-hesitation-at-6000-rpm/
Share on other sites

Exhaust won't be doing any harm but you may have noticed an increase in boost. Do you know what state your plugs are in? A new set of coppers might fix the problem. Ideally your next mod should be some means of tuning the engine.

in all honesty i have not ever changed the plugz :blink:

i aim once i get back to adelaide (see long trip in stagea thread) and doing an new waterpump, plugs and cam belt as i have tools, mates, second car and plenty of places to get parts from

once i get back i'll swap in some newies and retry - this is the extent of all planned modifications, goes fast enough and reliability is the top priority, not power.

Completey normal for a RB25, mine also does it and so I know a few other people with the same thing. The VVT changeover is at about 5000rpm so we're probably experiencing the increase in torque from the high rpm lobe. At first I thought it could be a tuning issue with the stock ecu running too rich, but I've pulled my mixtures back to an acceptable afr and still feel the torque increase around 5500-6000rpm.

I think you'll find if you look at some dyno sheets of RB25's running stock VVT cams and control points you would see this flat spot on the torque curve.

i'm guessing it is just more noticeable in a lower gear and without the backpressure of the old standard exhaust dampening its effects.

its hard to test it in 2nd and third gear safely for obvious reasons, and its likely i'll never do it again for another 3 months...

just had me a bit worried thats all

thanks

post-41987-1254741825_thumb.jpg

^^^ exact same engine with lesser an exhaust

it is pretty obvious the dip in performance which matches what i feel, almost looses power before making more.

some with bigger injectors, powerfc and exhaust cams have overcome this

not for me but looks common although i'll never go that far.

Coilpacks, well could be - it happend at the exact same rev range though, thought arcing packs woild be a bit more sporadic.

Edited by 910trx

Hey i had a series 2 RS4 stagea with RB25det engine... had the same problem, i went through every thing, coil packs, spark plugs, air flow meter. i couldnt work out what was wrong till about 4 months later it got worse and worse, turned out it was the fuel pump. put a new fuel pump in it and it went great

^^ your pic's a bit small mate.

doesn't the neo have Continuous Variable cam Timing, as opposed to some form of variable timing??? there shouldn't be an overlap at all (in theory) with cvt??

edit:

i've also noticed since putting a boost gauge in the girl's stag, the (stupid) dual stage boost doesn't work too great. in the second stage it spikes to 7 and then bleeds back out to 5 again :S

Edited by pyro-ns
yeah i know its small - but seems irrelevant now

whats a good pump worth these days?

Just put a 2nd hand one in... should set you back around $100.... or i think you could get a walbro for around $250 new.

it will only be one of these 3 things thats wrong, coil packs, spark plugs or fuel pump. see if you can borrow some one elses parts to check what is wrong

i'll wait untill i get back and start doing the things that i know it needs and the cheapest first

so probably plugs, pump, then packs

thanks guys really appreciate it

i'm still clueless when it comes to efi turbo - throw me a carby and i'm fine...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...