Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Yes Matty, try not to lap me more than twice per lap.

Me? Mate I has major traction issues... Even on semis!

PS: I want your roll cage... I see me axing it turn 3 or coming out of the esses...

Yah me and my mate will be coming to watch, unfortunately i lost my job recently so couldnt afford it. Cant wait to see some quick skylines going around. One day ill get the blue R33 out to a track day. We will be in my mates 32 taking some pics that ill try get up for you all.

Edited by Calsonic14U

yer we had fun even though we had problems. i blew a intercooler hose but i was able to fix it but by bro blew a big end bearing we think so after 3 sessions he was towed home :(

BUGGER, top day though even if it was cut short for me.

Oh well, Mark. Shame a $20 part can ruin a day, but at least you know you were setting some good times out there!

yer we had fun even though we had problems. i blew a intercooler hose but i was able to fix it but by bro blew a big end bearing we think so after 3 sessions he was towed home :thumbsup:

Yeah, that's gotta suck!

All in all, it looked like a good day, and as a spectator i had a pretty good time too! I'll be posting up some photos of Mark (mlr) and the two Matts (MBS206 and Cassbo), as well as a few other cars that caught my eye during the day, when I get a chance.




  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...