Jump to content
SAU Community

R33 Climate Problems

Mick

By Mick,
in General Maintenance

 Share

Recommended Posts

Mick Mentor

Mick

Posted
Posted

Hey i have a weird problem that i havent seen covered in my searches, or prehaps it is the same but no one has relised that this happens, well anyways i noticed that my climate control was blowing hot air out of the foot vents when the climate control was off and then i ended up working out that while the climate control is OFF and blowing hot air out of the foot vents that i could actualy press the blue down (cold) button a few times and that the hot air would turn to cool air, i carnt get it to shut off but when its hot outside at least i can make the air cool instead off hot. But the weird thing is that i can make the adjustment on the climate control without it being turned on, like seriously no display, the unit is off but when i press the up and down buttons it will change the temp of the air coming through the foot vents. Anyways does anyone know where to look to fix this constant airflow problem from my climate control on an r33. I dont know if its related but the aircon seems to have no cold air left in her, but from my memory it was perfectly good and just stopped blowing cold qair all of a sudden, its been like it for a while now, i dont think its gas but i guess it could be, maybe if the unit has been constantly on it ran the gas out. Does anyone have any suggestions on how i might fix this because i think the aircon not giving me cold air and the hot air constantly coming out of the foot vents is all related, i just want to know where to start looking to fix it ..

Link to comment
https://www.sau.com.au/forums/topic/298048-r33-climate-problems/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Shoota's R33 GT-R RB30/26

      By PranK · Posted

      It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • ShezzDogs
      R34 Skyline Sunroof Won't Tilt/Vent

      By ShezzDogs · Posted

      Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...