Jump to content
SAU Community

Need Help, Speedo Is Broken!

levizzle

By levizzle,
in General Maintenance

 Share

Recommended Posts

levizzle Community Regular

levizzle

Posted
Posted

My speedo broke a few days ago, and I assumed it was because I had fidelled with it a few months ago putting custom faces on. So I took this as an excuse to get a nismo dash. The speedo still doesnt work on the nismo dash either and the tacho also doesnt work on the nismo, but tacho works fine when I put the original back. One difference between them is the original has a little box with two wires on the back, but the nismo doesnt so this may be why the tacho doesnt work when I change it. But why isnt my speedo working anymore, do i need a new speedo cable???? Please help cause I dont know how fast I am going!

Link to comment
https://www.sau.com.au/forums/topic/298531-need-help-speedo-is-broken/
Share on other sites
levizzle Community Regular

levizzle

Posted
  • Author
Posted

Anyone have an explanation why the cable would fail, I dont really know how the mechanism works but I like to learn from my experiences. Do you think I could swap it over myself? and would there be a way to test if that is truly the cause?

blind_elk Grand Master

blind_elk

Posted
Posted

What usually happens is that the little bit of cable that goes into the back of the speedo breaks. But it could also be that the drive mechanism in the gearbox is broken or seized.

It is replaceable by non-professional - I think you need to remove the instrument cluster to make life easier.

mad082 Grand Master

mad082

Posted
Posted

ummm, do the speedo's even use a cable? i thought they were an electronic speedo (look analogue but are a digital gauge). when i have taken out my dash in my 33 i never saw a speedo cable. i'm pretty sure they use a small little sender that screws into the gearbox that has a little wheel on it which then sends a signal to the ecu and the dash.

i would try and borrow a consult cable and see if the ecu is getting a speedo signal. this will tell you whether the speedo sender unit is stuffed or if it is just a short in the wiring.

heller44 Mentor

heller44

Posted
Posted

Easiest way, remove cluster, you will see the end of the cable.. start the car and drive it back and then forward, you should see the end of the cable turn if it is still intact.

mad082 : as battery has pointed out, r32 cable drive.. in the back of the cluster is where the speed signal is generated for the ecu and other stuff, so no mechanical drive means everything doesn't work.

levizzle : do you have any other weird stuff working or not working on the other dash when you plug it in? you might have a different series cluster, some of the pinouts on the connectors were changed.

levizzle Community Regular

levizzle

Posted
  • Author
Posted
Easiest way, remove cluster, you will see the end of the cable.. start the car and drive it back and then forward, you should see the end of the cable turn if it is still intact.

mad082 : as battery has pointed out, r32 cable drive.. in the back of the cluster is where the speed signal is generated for the ecu and other stuff, so no mechanical drive means everything doesn't work.

levizzle : do you have any other weird stuff working or not working on the other dash when you plug it in? you might have a different series cluster, some of the pinouts on the connectors were changed.

Havent had time to check cable yet, but yeah when i plug the nismo one all other gauges work fine, except speedo and tacho have no movement. Do all the other gauges run off electric signal and speedo is off cable? What does the tacho run off? My car is a '89 R32 so it could be a different series issue.

heller44 Mentor

heller44

Posted
Posted

'all the other gauges run off electric signal and speedo is off cable' yep. My cable snapped where the square drive on the end of the cable, behind the cluster, mates onto the cable itself.. bit of devcon and it has been going fine for about 2 years now.. dodgy but works.

tacho is from the ecu.

Check on the back of the nismo one where the contacts are for the tacho, there are little labels that are sort of sensible that will help you.. make sure they are clean and making a good contact.. otherwise I would have to assume the tacho is faulty, try in another car though if possible.

If it was a series issue you would have other issues.

  • 4 weeks later...
levizzle Community Regular

levizzle

Posted
  • Author
Posted

BTW i got around to changing the cable and speedo works fine now, just have to work out issues with nismo dash, so have standard one in for now.

Also for anyone who needs to replace to their cable in the future and reads this thread, I was doing some forum searching for tips on changing the cable and then found out a place in SA called Gaugeworks can fix the old speedo cable and put metal ends on instead of those crap plastic ones so it wont break again, plus its cheaper than buying a new cable, about $70. If only I found this out before I bought a whole new one!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...