Greddy Profec Ii Questions

[Adz2332]

I have a greddy profec II in my car... couple questions

I had to move it so i disconected it completly and moved it.

Does it have a memory so it remebers my settings? Or by disconnection it had it lost the settings??? (will be soooo pissed if it has lost it as i just had it tuned!)

Also it isnt reading the vacum and boost... its just sitting on 0.00 now since reconecting it.. Why???

But in saying all this its only the high / low boost settings that could be lost right? so if i know them i can just set them again myself????

Or what else could it loose etc???

in hind site i should have written it down! but i didnt think of any of this till i had disconected it!

Any help would be great..

[JonnoHR31]

it wont loose your settings, it loses power everytime you turn your key off.

if its only reading 0 then its not getting a proper signal, check the vac line

[Moodles2]

^^ +1 vac line, maybe you pulled too hard on the rubber vac line and disconnected the end thats in the enginebay.. though you would have a noticle vacuum leak and hear hissing in the enginebay

[Adz2332]

Thanks guys!

Will check for a vac leak... Havent heard anything... i dont think

Much appreciated guys

[skylinecouple]

Press and hold the mode button I think from memory for 2 sec, that will turn it back on. I would go out and do it now but too lazy.

[Adz2332]

Well checked it all...

No leak i can see or hear....

im stumped now

[Flargh!]

Well checked it all...

No leak i can see or hear....

im stumped now

Hose kinked somewhere and not letting air through maybe? Probably somewhere you cant see and in the worst bastard of a place to get at.

[Adz2332]

yer may have to look at that... but if it was a kink id expect it to register a little or from time to time.... and yes its definatly on!! lol

[JonnoHR31]

pull the vac line completely out and install it again. only way to be sure its not blocked somewhere. where have u got it?

[Adz2332]

Yer will try that this weekend... was hoping i wouldnt have to do it...

its installed in a 180sx, under the dash where my left knee is.