Jump to content
SAU Community

Recommended Posts

heyas,

i need some help setting up an SAFC II in my mates 32gts4, i installed the safc and i know its wired in right, i have the throttle set diagonally upward right and set to 6cyl, i have hot-wire selected and this is where is gets confusing, i have the in out scale set to 2, so 2in 2out, then next menu is a cal. menu with the same Xin Xout which is set a the factory 1 at the moment, so cal. 1in 1out, i have read somewhere on here the scale should be set to 2in 4out, but when i tried this with his rb20 it ran like a cop with a HUGE misfire at 3k, which didnt allow the motor to rev past 3.5 or so....so my Q's are

wat should the scale be set to?

and

wat should the cal. be set to?

the car seems to run fine on 2in 2out so i am leaving it there until i can get somebody to give me straight facts which the motor is happy with.

the car has the following mods,

3" turbo back

FMIC kit

Pod filter wit mesh screens removed

13psi

and the SAFC II

cheers

wog

Link to comment
https://www.sau.com.au/forums/topic/299751-safc-ii-in-a-r32-rb20det/
Share on other sites

i am running one in mine but somethin is wrong still tryn to work it out.. nothing comes up on the screen no more only the key pad lights up orange??? car didnt run. so i unplugged it do u no anything about it .. taking it to tuner next week to try get fixed then tuned again...

well i have wired a few in, not sure wat would cause the screen to not work and the pad to work, maybe the screen is fubared!

wats your location? if your in perth i could have a look at it for you, i think most people go powerFC which is why i have got limited responses in this thread, but once i find the proper settings ill post em up for others, people ask these sorta Q's!!

-wog

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...