Jump to content
SAU Community

Recommended Posts

  • Replies 3.6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

can't do anything more for mechanical grip- they already run slicks and tricky LSD's

going back to ground effects means the grips levels shouldn't change as much when cars are in close proximity

There are plenty of things they can do to reduce tyre grip. Reduced size, harder compounds, etc. Also, reducing aero and adding power (the first might happen, the second won't) will create more sliding and make the cars harder to drive. Think Formula Ford with wings and bigger engines (actually I think the 2013 engines will be smaller than FF engines, but that's what turbos are for). I like the ground effect idea, as has been mentioned this will reduce the penalty of turbulent air.

Back in the 80s the cars had way too much power for the tyre/aero technologies. That's why driver skill was so important - you couldn't just plant the foot and know it would stick. You certainly couldn't take Eau Rouge one-handed.

I bet Vetool will still be a COCKHEAD in 2013, regardless

Some things never change - the tides come and go, the seasons change, Vetool crashes into innocent bystanders ... the guy must be a nightmare in a car park given how much trouble he has passing someone who is holding their line. He must crash into stationary objects all the time.

Been saying for a while now for the F1 boys to piss the aero off and go back to underbody downforce! I beleive that the indycars of the late 90's early 2000's had it right with enough aerodynamic downforce and most of the grip generated from underbody...Turbo's sound good though not sure about the 1.5 litre engines and only 650 hp! Dare i say it but the v8's make that sorta power now how can the pinicle of world motorsport make less/same as a bogan racing catagory

If they end up anything like what the turbo F1 cars were like in the early 80's, big power and little to no driver aids, it'll be a good thing. Less aero and more underbody craftiness brings it back to it's original roots.

Check these vids of some of the old F1 Turbo goodness.

And if it brings back some of the excitement from the 79 French GP of the battle between Vileneuve and Arnoux, I'll be mighty impressed.

http://www.youtube.com/watch?v=kl2tIFxSEGA

Edited by SABBAi
Dare i say it but the v8's make that sorta power now how can the pinicle of world motorsport make less/same as a bogan racing catagory

And the ultimate bogan category, drag racing, has always made far more power than F1 ever will. Get over it people - There's plenty more to racing than hp. Personally I like knocking off the big boys with my 120 flywheel kW.

Tim Goss from McLaren (on F1.com)

"We’ve had to make some minor modifications just to make sure we’re well inside the deflection limits the FIA are going to set on that."

Yep it is just RBR and Ferrari.....uhuh.

"McLaren lie..........................

......................... second in the constructors’ championship on 329 points, just one behind leaders Red Bull."

(I am just practising my journalistic skills by editing things to suit the angle)

Been saying for a while now for the F1 boys to piss the aero off and go back to underbody downforce! I beleive that the indycars of the late 90's early 2000's had it right with enough aerodynamic downforce and most of the grip generated from underbody...Turbo's sound good though not sure about the 1.5 litre engines and only 650 hp! Dare i say it but the v8's make that sorta power now how can the pinicle of world motorsport make less/same as a bogan racing catagory

The V8's make over 100hp more then that...

I seriously do not see the point in cobbling the engines so much in this way, from an engineering standpoint it makes the development process iterative and evolutionary as opposed to revolutionary which massively increases cost and totally torpedoes your performance/dollar ratio.

They can dress it up all they want but F1 will never be a green sport, all they can do is plant some trees, offset their carbon footprint (what a joke) and get on with racing.

If formula 1 is really to be a hotbed of automotive development, they are actually going to need the engineers to do some real development, this aside the actual amount of technology that has reached road cars from F1 since it's inception is minimal at best, so why bother ?

They could just save a bunch of money and have a control engine. I'm thinkin SR20.

For 20k each they'll have 650HP, and no need for a five engine per season limit, they'll only need one if they give it a few oil changes through the season.

What a farce.

the sound of an F1 car is supposed to make the hair on your arms stand up. You won't get that with a turbo four with a 10k rev ceiling. You just won't.

True, but personally the current crop of F1 don't do it for me either.

Remember, one of the best sounding engines ever was a supercharged 1.5. (I'm sure you've all heard it, but here it is anyway, coz I love listening to it)

I think it was redlined at about 13000 RPM, though I'm not certain about that.

I know that turbos tend to kill the sound a bit but if they can give the engines some balls, rather than 18,000 RPM mozzies flying around the cicuit then they might just pull it off.

They could just save a bunch of money and have a control engine. I'm thinkin SR20.

For 20k each they'll have 650HP, and no need for a five engine per season limit, they'll only need one if they give it a few oil changes through the season.

What a farce.

+1

Nahhh. You can pull me off champ.

:blink::)

I don't know you that well :D

Don't get me wrong - noise is a very important part of the whole spectacle. I think that's one of the major things killing motorsport these days. The noise restrictions at Lakeside are a joke. Frikking morons buying a house next to a race track (which has been there for decades) have the gall to complain about the noise and lobby to shut it down. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...