Jump to content
SAU Community

Recommended Posts

hey all time to part with my much beloved rims which i purchased new and have taken the greatest care of to maintain perfect condition. Rims are the Wedsports SA70 model size 18x10.5 +18, perfect fitment for GTR's and newer EVO's (as ive been told by an Evo 10 owner), but will fit any other car as well as long as you are game. two rims have 80% tread Bridgestine RE050A 255/35/18 and other two have 80% Michellin Pilotsports 255/35/18, all purchased new (was very painful on the wallet). all tires are run flat as well. only problem with the wheels is one wheel has slight rash on outer lip due to gay sydney pot holes which left a slight rash approx 3cm, barely noticeable, the rest are perfect!

located in sydney (marrickville) contact via PM is best.

cheers

Trong

SA70-1-1.jpg

SNC00055.jpg

SA70-3.jpg

price: $3000

Link to comment
https://www.sau.com.au/forums/topic/300866-weds-sa70-18x105-18/
Share on other sites

PM's replied. yea they fit on the GTST fine with plenty of clearance. the 2nd and 3rd pics on post #3 shows fitment on front and rear on my car

  • 2 weeks later...
  • 5 weeks later...
  • 1 month later...

For anyone doubting these wheels wil definately clear AP Racing 6 pots and evo x brembo combinations let alone 33 gtr brembos...(which are smaller than Evo & Sti Brembos)

Will be easy fit in R33/R34 GTR guards.

R32 GTR will need a light lip roll.

the GTSt's and Silvia series only if your game enough and have supporting suspension mods (camber) and correct stretched tyre combo, raised like a 4wd or guard work for front and rear clearances

free bump dom as these are some craaaazzzzzzyyyyyy wheels you got there...

Edited by krayzie32

cheers for the clarification :devil: the wheels will easily clear any skyline brake combo with ease and will sit very nicely on Evo's as well. on my car, only a lip roll and a slight flare was done to have them sit the way they do, but the new rims are now on which renders the work useless as i need to bolt on 50mm flares lol in all honesty, just throw me a decent offer as these need to be sold to clear up some debts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...