Jump to content
SAU Community

Recommended Posts

hey everyone

the left HID on my s2 rs4 has stopped working.

the globe used to light up but only about half bright..

thel a few flickers..

then it turns off

now wont turn on at all.

i had a spare D2R globe.. plugged in , still no workie

where is the balast on a stagea?

and is there any way to test it ?

cheers :P

Link to comment
https://www.sau.com.au/forums/topic/300907-headlight-problems/
Share on other sites

Hi there, you could try bulb(s) from LH offending cct in RH working cct to confirm your bulb(s) are good. Dunno where ballasts are, I have S1, maybe trace wiring back? I should imagine the ballasts would be close to headlamp location but. Also check out diy Stagea section for suggestions if you haven't already.

Cheers GW

Edit: http://www.skylinesaustralia.com/forums/Xe...l&hl=hid%2A

Maybe helpful?

Edited by 260tech

they aren't actually on the backside of the headlight if you want to get technical, cam

if you take the headlight out it is bolted to the inner side of the housing, pretty much between the main headlight unit and the highbeams

and i have a pair of balasts here too from when mine got complied - chuck me an offer

Ballast on S2 stagea, between headlight and hi beam - bolted to side of headlight.

Will have to remove headlight to access - remove grill, then hi beam - front bar stays in place

###dont forget bolts from rear of rad support panel###

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...