Jump to content
SAU Community

Recommended Posts

Have a slipping clutch in a standard R32GTR. Planning to replace with a heavy duty single plate next week - (for future 300 RWKW/circuit work).

Was also going to get a larger/extended etc sump installed in the new year.

Question: Is it more economical to get them installed at the same time? Can the sump be installed with only the removal of the gearbox? or does the engine have to come out? Also, which aftermarket sump is recommended? Tomei? Trust? (extension?) (baffeled?)

Where to purchase in WA?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/301143-r32-sump-install-questions/
Share on other sites

I believe the baffled Trust extension is what most people use, needs to be welded in.

Sump off (especially in 4wd) is pretty much an engine out job. You might be able to save some labour if the box needs to come out too.

Most people use the Trust Sump extension with baffles (needs to be welded on standard sump)

Cheaper option is a Tomei sump baffle for the stock sump

otherwise you can go for custom setups like Hi-Octane or something

as for installation i have no idea :D

Trust extension is SHIT ..

Want this bad boy set up .. Oil change it takes 9ltrs

This is whats on our 32 , done by Advan performance in NSW .. Look at 3rd pic you see blue earls fitting . That is now plumbed from Advan catch can to sump with earls 1 way oil valve

6408.jpg

6409.jpg

6410.jpg

trust sump extension and baffle kit is very good and good value for money

only problem you may have is it sits lower that xmember, but if you have decent suspension it does not matter... my car was low and i never had a issue with it touching the ground

i have the imports 101 kit, i was going to get the trust one but didnt like how low they hang.. very happy with the imports 101 kit and good service too

think it was about $1100 supplied and welded to the standard sump

i think my greddy cost around $500 welded to the standard sump and ready to go...

double the price is a bit steep

i have the imports 101 kit, i was going to get the trust one but didnt like how low they hang.. very happy with the imports 101 kit and good service too

think it was about $1100 supplied and welded to the standard sump

Pics of how your sump sits ???

Thanks for replies so far - but can the sump be extended/replaced with the above mentioned products/extensions without removing the engine or gearbox? or can it just be done removing the gearbox?

(As mentioned previously, have to replace clutch, so will also modify/replace sump if it can be done with just the gearbox out).

If can be done without removing either - happy days..........I will get it done later, and just replace the clutch now.

(nothing more frustrating then having a GTR with a slipping clutch!)

Cheers

I have removed the Sump without removing the engine but its not really any easier than removing the engine. Stock pump is ok with bigger sump but the pump is a weak link.

Imports/Garage101 have a billet Oil pump gearset upgrade now.

Thanks.

So - according to above, gearbox removal is irrelevent to sump replacment/modification?

  • 3 weeks later...

just an update on this.

im gonna get a N1 oil pump for my BNR32 and was wondering what is recommnded for a Sump Extension

Trust?

Tomei? etc...

what brand and where can I source one from either QLD or NSW? for a good price

Cheers

Pics of how your sump sits ???
Looks much the same as the Advan one, Very much more complex than the more basic Trust sump inc the trick Baffles.

There is a Cylinder head drain option also.

sorry havent got any pics of how it sits, but its pretty much exactly the same as that advan one.. the rear head drain is a standard fitting on the sump - 10 i think. i had no intention of using a rear head drain so i have it plugged up.

comparing this to the trust extension is not fair.. these are a work of art once fitted and and sitting behind the kframe in a nice safe place is where the extra $350 is, not to mention the extra oil they hold compared to the trust jobby

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...