Jump to content
SAU Community

Recommended Posts

Hello all

I have just taken ownership of a 1999 stagea 260rs and it's great I love it.

I should have brought myself this present a long time ago hahaha.

I do have a few question if some would please help me out

1. Do the middle round lights at the front of the series 2 only come on as high beams ??

2. The fluid bottle in the rear right hand side boot ??? :)

3. sometimes when I drive it a HICAS light comes on I know its for the 4ws but where do I fill it, is it this bottle in the boot ??and what do I fill it with ??

4. where do you guys in Queensland service your Stagea's

5. Are heavy clutches harder to drive slowly my car seems to shake alot when I reverse or try to take off slowly is this normal??

It would be a great help if you guys could help me out on these things

Will there be a cruise in QLD sometime soon ??

Thanks

Mike

Look into a Jim Berry clutch, he can make something to suit your needs. There are many threads on him.

Bottle in the rear is ATTESSA fluid, check the level with the car idling, should be between min and max. there are threads on the best fluids etc

Just use a quality (synthetic) atf for the atttesa and the power steering.

Its possible you need to become accustomed to driving slowly without slipping the clutch (i.e. in or out) or its possible there's a fault - maybe find a local member to try it for you.

Congratulations on getting a 260 - you have a head start on us mere RS4T owners!

Thanks guys for the help

I had the neighbour have drive and he said its a heavy clutch and it could also so be a button.

I have never had a button clutch I just have to ride the clutch more he said

When the next QLD cruize Guys ??

Edited by e-clip
It sounds like a button clutch of some sort.

That was my first thought also.

If its anything like mine, if you ride it at all (particulary noticeable in reverse) it will shudder and feel all round nasty.

Also if its a button clutch it will wear out quickly by riding it. Unless it is a mechanical fault, just play around until you find the sweet spot or if it really bothers you, put a new clutch higher on the priority list. (At least then you will know what you have).

Is the car standard? Have any pics?

Luke

I agree with Luke, riding a button clutch is worse for it. I bought my car with one installed by the previous owner, and the key is to ride it LESS. Give it a little bit more revs on take off, and ease it out a bit more quickly. If you get it right and get used to it, it shouldn't stall - there's enough torque in an RB25 or RB26 to get the car moving along without the engine dying.

I rode mine a few weeks ago trying to get a quick take off on a steep hill, and it shook the car so badly the CD jumped...

my new little r32 4dr RB26dett has a button clutch. I got used to it after the original take off when driving away, and no issue since.

my mate, however, rode it all the way on his drive around our local test circuit, muttering "shit", "sorry", "ah damn", etc every shudder he induced.

Hey mate yeah they are nice car's.

I do have a few question if some would please help me out

1. Do the middle round lights at the front of the series 2 only come on as high beams ?? Yep

2. The fluid bottle in the rear right hand side boot ??? :DAttessa fluid, can use PWR steer fluid

3. sometimes when I drive it a HICAS light comes on I know its for the 4ws but where do I fill it, is it this bottle in the boot ??and what do I fill it with ?? Its electronic, nothing to fill, may be damaged, mine had the plug smashed over when transported, just install a cancellor bar.

4. where do you guys in Queensland service your Stagea's mine was orriginally done at Gavin wood autotech on the goldcoast

5. Are heavy clutches harder to drive slowly my car seems to shake alot when I reverse or try to take off slowly is this normal?? Mine has a button and is a dog of a thing in the carpark, as mentioned a few more rev's and just drop it, slipping will make it shuidder and wear out quickly.

Yeah I had similar problems with mine. It came from Japan with some HKS triple plate clutch that was a pain in the a*s to drive.

Did some searching and ending up getting a single plate Nismo coppermix or something. AWESOME clutch!

My 260RS is now around 270kW and it handles the power easy. But best is city driving, I can sit in second and come to almost a standstill, and it don't stall.

Real easy on the foot too.

+1 for the Nismo Coppermix clutch.

Hey thanks for everyone's help

I'am starting to get the hang of the clutch. Its a bloody nice car

The last owner had it on the dyno, 330hp at the wheels but its heavy on the fuel but you can't have everything

I upload some pics tomorrow

Edited by e-clip

330hp? No wonder you said it was fast! ...that's over 50% more power than James got in his new RS260 (a few posts down). Let us know what mods you have (that you can tell) when you post up the pics.

This is my baby

http://www.skylinesaustralia.com/forums/St...hl=autech+260rs

Silly me if I just read the post I would have seen it has a Excedy single plate clutch

Edited by e-clip

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...