Jump to content
SAU Community

Recommended Posts

i'm looking for a company that does decent thorough inspection.

i did use stateroads last time and i was happy with them however, they are a bit pricey especially considering a basic mechanical inspection doesn't include a compression test and it was $250.

so, any other places that will check over the car and do a compression test for around $250?

on sight or drive in (not too far from mill park (north east)))

Link to comment
https://www.sau.com.au/forums/topic/301514-car-inspection/
Share on other sites

You'll have to take the car to a workshop - simple as that if you want a comp test, or buy one and do it yourself. Then you might appreciate why it would cost more than $250 :)

Stateroads, for the price you pay is quite good. You have to remember it is a mobile service.

You try doing a comp test on a RB25 and you'll soon realise why they will not do that. Time vs price is variable across the motor in question and is something that then makes onsite quotes very hard and much more detailed motor knowledge required (ie, RB26's take half the amount of time as a RB25).

Also then factor in the fact they need to remove parts and are therefore liable should they not reassemble correctly :P

I honestly think your expectation of Stateroads isn't quite correct :mage:

Link to comment
https://www.sau.com.au/forums/topic/301514-car-inspection/#findComment-5005528
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...