Jump to content
SAU Community

Recommended Posts

hey guys i wanna get some things re sprayed on my car if anyone noes a good place or even a person that can do it for a good price iv been quoted to much for things i need just my side skirts and a front bar to be fiberglassed and painted

Link to comment
https://www.sau.com.au/forums/topic/301898-helpp-cheap-place-for-painting/
Share on other sites

as nismiod has stated, you get what you pay for.

i had sideskirts painted on my old car and they bubbled something shocking (was a cheapish job)

plus a bad paint job always looks bad, cant polish sh!t

^ those can be initial things... sup[er cheap jobs haha :/

However even with a job that "looks" good... Give it 18-24 months, bit of weather and so on.

That is when you start to tell the difference between a good job and a great job. Suddenly the paint isn't as "deep", the job becomes a tad dull etc.

Stuff that is very hard to pick when you look at the car everyday if it is your own car.

But a easy thing is to get another piece prepped/sprayed, chuck it in yor cupboard. Couple years later pull it out and have a compare :(

Another vote for DT Panels..

But a easy thing is to get another piece prepped/sprayed, chuck it in yor cupboard. Couple years later pull it out and have a compare :(

Possibly one of the stupidest things you've said/posted... :/

How so?

The test of time, a good prepped job, bodywork vs fade, be lacklustre and similar - IMO it would be the best possible test :D

After 2 yrs, all of a sudden your "wow" job that looked awesome on the first day, suddenly... a bit average.

Where a quality job, using quality materials "read:not fken cheap", will look virtually as good as the day it came off the gun.

How so?

The test of time, a good prepped job, bodywork vs fade, be lacklustre and similar - IMO it would be the best possible test :D

After 2 yrs, all of a sudden your "wow" job that looked awesome on the first day, suddenly... a bit average.

Where a quality job, using quality materials "read:not fken cheap", will look virtually as good as the day it came off the gun.

I was refferring more to the fact 1 piece (either the cheaper or more expensive) would be sitting in a cupboard, whereas the other is being used under completely different conditions (sun, rain etc etc)

Painting half the car (line down the middle) with the 2 differing paintjobs in the same color would be the ultimate test. At the end of the day, if shop X is offering decent work at $2k, and shop Y is offering great work at $6k, and you're getting a few years out of shop X, you're still in front if in fact it does need re-doing in a few years.

I'm not denying you'll get better quality for more money (generally speaking of course (the way I chose to modify my car shows where my opinion lies on that)) but a lot of people are interested in value for money, and someone like DT caters to that brilliantly imo :P

you can just get any old piece of ally metal :D

True - You're ultimate test point is far more correct than mine.

I also agree you would be infront in some respects if you re-sprayed every 3 years, upto 9yr marker as an example.

Depends what your budget is at the end of the day. If you want good work, and are prepared to pay for it - you do that.

DT certainly cater for the on-budget people, no question there either :P

DT have proven to be good and not expensive for a lot of people

Maybe try Patti Panels in Campbellfield.

HERE is what James did for me.

Please everyone. Don't turn this into another thread about quality always = massive dollars. There are enough of them in this section. We all know that the more you spend the better job you will get but show cars aren't always what people are after.

new joint i found in morrabbin - Paintwerks

Owner DEFINITELY knows his stuff. Had a good chat about detailing as well, of which he was also very clued in.

More than DT, but would be a step up as well. So if you're looking for that little something more, i'd hit them up for a quote.

There's a certain panel shop in footscray I'd avoid...

Totally agree. West Footscray to be exact. At the back of the shop to be even more exact.

As everybody had said, if you want a good job, be prepared to spend more money. If you are willing to pay little for an average job, be prepared for disappointments when you get your car back.

Micolour seems to be a place everyone recommends on SAU. You can also try Gals Panels at tullamarine OR if you can come up with more cash and if you want a perfect job, ring up File Finish http://www.filefinish.com.au/ . They do aston martins, bmws and lots of euro cars but i've seen gtrs in the shop before as well. It's entirely up to how deep your pocket is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...