Jump to content
SAU Community

Recommended Posts

You said that you wanted to build a 4 door GT-R. Genuine, factory built, GT-R sedans are almost impossible to find.

My point is that doing it yourself by getting a 4 door chassis and transplanting the engine/driveline from a GT-R coupe into it is going to be a massive job with lots of custom work from whichever workshop you eventually get to help you with it. The end result is more prone to failure than a 4 door car that left the factory with an AWD drivetrain, and OEM levels of engineering and testing behind it.

If you're talking about just dropping an RB26DETT into a sedan chassis then it should be relatively simple, and reliability will come down more to how you treat the car than anything else. But, to be quite blunt, the GT-R is defined more by its advanced drivetrain than its engine so that car wouldn't be a "4 door GT-R" any more than some ricer who sticks badges on their GTS-t.

If you intend on having the GT-R's ATTESSA (which is different to the GTS4's ATTESSA) fitted as well as the engine into a sedan, which would make it more worthy of the title, then you're going to need deep pockets and people who really know what they're doing. Even then, I'd still be worried that things had to be kludged to fit/work, which means it's more likely to break than a car that was designed to be that way in the first place.

Check out these threads.

http://www.skylinesaustralia.com/forums/98...Gt-t297401.html

http://www.skylinesaustralia.com/forums/R3...ld-t280439.html

My opinion:

If you are going the R34 N/A route - Keep the 4 door as "daily spec" - With minimal mods. High flow panel filter, extractors and a decent sounding stereo (not the full DOOF DOOF stuff - adds so much weight and takes boot space) and some nice alloys. This will also enable you to get parts from the nissan dealerships.

R34 non-turbo are not quick cars (on par with your typical n/a aussie 6s), however they do keep pace with the "majority" of cars out there - so they are not underpowered by any means. I'd put them as VERY average. Only real advantage of the n/a R34 is the better handling and the good looks (majority of people out there have no clue between the bread and butter GT/GT-T to the GT-R).

When you save up enough you could probably end up having 2 cars :P R34 4 door as a daily and a GT-R for the weekend/having fun...

I just picked up a R32 sedan gtst with Rb26dett conversion

plenty of mods done to it, upgraded brakes, tein suspension, 750cc injectors, ecu, gtr fuel pump, etc

they are around, need to be quick tho when they pop up

about to strip it into a track biatch

unless you want it for 10k ;)

DSC00350.jpg

buy a POS first car cheap as chips

save as much money as you can in the mean time

when off p's buy an ER34 GTT and youll be fine

ER34 GTT to GTR conversion is stupid, pointless, not worth the $ and a waste of time

the money youll spend all up - you could just buy a GTR R34 for the price they are now

the converted ER34 GTT to GTR will be worth nothing in comparison to what you spend

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...