Jump to content
SAU Community

Recommended Posts

Just bought this R-34 GT-T (98) 2.5 L 2 door recently, it seems to overheat only on 35degree days or higher especially when running the a/c. Makes no difference if im in traffic or crusing down the motorway, i make sure coolant is there, any suggestions or help with this ?

Link to comment
https://www.sau.com.au/forums/topic/302388-gt-t-overheating-assistance-plz/
Share on other sites

with these thing hard to say i would be getting the cooling system pressure tested, also think about basic things like replace the thermostat, radiator cap, coolant and maybe get the radiator cleaned out professionally in case its blocked.... if non of that helps maybe its got a blown hg slowly on its way.... you would hope not thou.....

Edited by rgr34
with these thing hard to say i would be getting the cooling system pressure tested, also think about basic things like replace the thermostat, radiator cap, coolant and maybe get the radiator cleaned out professionally in case its blocked.... if non of that helps maybe its got a blown hg slowly on its way.... you would hope not thou.....

cheers. i did get the first things done already, maybe now ill get the radiator/head gasket checked out professionaly.

Which is a good mechanic to take skylines for servicing with decent price?

Same thing just happened to me. Only just made it home so I was lucky in that regard. Smoke was coming out of the radiator hose and somewhere from the back of the engine to, couldn't see where it was definitely coming though.

Radiator hose was loose so I'll tighten that up and top up water & coolant levels once the engine has cooled down...and if it still overheats then I'll be coming back to this thread needing help haha

My clutch is pretty f***ed at the moment, although I didn't think that would be a cause to the car overheating?

So I put the radiator hose back in place and topped up the radiator with water. Yet it still overheats, this time its spitting and steaming from the top radiator hose (radiator end) and also, when I hit boost, the car basically starts shaking. Whats up with that?

My clutch is pretty f***ed at the moment, although I didn't think that would be a cause to the car overheating?

So I put the radiator hose back in place and topped up the radiator with water. Yet it still overheats, this time its spitting and steaming from the top radiator hose (radiator end) and also, when I hit boost, the car basically starts shaking. Whats up with that?

I mean the fan clutch.

there ae plenty of things to check before looking at headgasket, etc when it comes to heating issues.

first is to bleed the system. this is free and a good place to start. also check the clutch fan while you are at it as it's something you can check yourself. also check for any crap between the radiator and the aircon dryer/radiator. this can sometimes get a bit blocked up and educe airflow if the car is often parked unde a tree and leaves fall onto the front bar and get sucked through the grill when the car is started.

next is to replace the thermostat as this is something that does need to be replaced over time and would probably be the cause of a lot of heating issues. replace the coolant while you are at it.

then you could get the radiator professionally cleaned. in my opinion radiator flushes don't do crap as they don't get out the build up of crap that blocks the radiator core.

next on the list is the water pump. if the impellor in this is worn it won't pump the water fast enough and cause heating issues (anyone that has ever owned an outboard will know all about impellors and water pumps)

unless there is a reason to check the headgasket (such as oil and water mixing together) or bubles in the radiator when the car is running or the car is hard to start then when it does start blows a heap of white smoke for a short amount of time i don't usually bother. and milky oil or coolant isn't always the sign of a blown headgasket. i've had 2 blow and not ended up with the milk of death, but instead ended up with coolant in the cylinders.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...